source for 1.9" intake valves & 1.6" exhaust valves

Anything from daily drivers to weekend warriors. Get info about performance parts/upgrades and those not-so-original parts.

source for 1.9" intake valves & 1.6" exhaust valves

Postby zray » Tue May 07, 2013 6:18 pm

anyone know of a source for 289 1.9" intake valves & 1.6" exhaust valves in the stock length of 4.863" ?

I can find plenty of choices in longer lengths, but don't want to run different length pushrods unless I have to.


Z.
zray
LunatiK
 
Posts: 846
Joined: Fri Nov 25, 2011 2:07 pm

Re: source for 1.9" intake valves & 1.6" exhaust valves

Postby d0zf » Tue Jan 28, 2014 7:03 pm

Ferrea custom grinds

These are just a little longer at 4.96

http://www.ferrea.com/Ford-Engine-Valve ... model=3026

The site is a bit difficult to narrow down by size but they have some SB chevy valves at 4.91

If you have the valves out of the hipo heads, can you cou me tip length of the original velves.
User avatar
d0zf
AttraKted
 
Posts: 27
Joined: Tue Dec 06, 2011 6:54 pm

Re: source for 1.9" intake valves & 1.6" exhaust valves

Postby zray » Tue Jan 28, 2014 8:35 pm

d0zf wrote:Ferrea custom grinds

These are just a little longer at 4.96

http://www.ferrea.com/Ford-Engine-Valve ... model=3026

The site is a bit difficult to narrow down by size but they have some SB chevy valves at 4.91

If you have the valves out of the hipo heads, can you cou me tip length of the original velves.


Thanks to a guy over on the club cobra forum, I found some Ferrea valves, series 6000, that are very close to the stock length of 4.863. And the motor is together and running very well.
I always have had the 1.94 / 1.60 valves put in my HiPo heads. Most recently i used the Ferrea 6000 series valves ( part numbers F6299 1.94 & F6305 1.60 ). They are only marginally longer than the stock Ford valves,at 4.91", and work nicely with a slightly different length of pushrod.

Z
zray
LunatiK
 
Posts: 846
Joined: Fri Nov 25, 2011 2:07 pm


Return to Modified

Who is online

Users browsing this forum: No registered users and 1 guest