Page 4 of 6

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Mon Jul 11, 2016 9:52 pm
by SixT5HiPo
This distributor is for sale by eBay member " mysunshine302".

DESCRIPTION: "You are bidding on a 100% original Ford 289 HiPo (K) code service replacement dual point distributor. This 289 HiPo dual point distributor was purchase new from a Ford dealership back in early 70's. ** Recently just go back from being totally restored! All NOS Motorcraft parts. Points & condenser & primary wire & dual point breaker plate & new hardware & bushing. **Comes complete as in all the pictures.*** I am currently selling off all my Ford parts I have been collecting over the last 40+ years. My family and I are now into the New Generation Mustangs. This original 289 HiPo dual point distributor is correct fit for the 1964 1/2 to 1968 289 HiPo (K) code engine in the Shelby GT350 & Mustang GT or Fairlane GT or Torino GT & Falcon & Mercury Comet & AC Shelby Cobra. Correct Shelby part number on Motorcraft aluminum housing is C50F-12127-E. Date code 1D20. Part number cast on housing C5OF-12131-B.
** Looks awesome with a nice looking original patina aluminum housing finish! Ready to install & rev!!!! Would work great if you want to save a *lot of money or if you are totally restoring your original 289 HiPo engine or if you lost your 289 HiPo dual point distributor.**Also correct replacement Hop/Up fit that was used in all the 1969 & 1970 Boss 302 & Tran Am engines. **I have a Buy It Now if it can help you. Or just bid freely. ** Please ask all your question before auction ends.**Remember original Ford parts fit and give the best performance! Shipping fee also includes Full insurance value."

eBay Link

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Jul 17, 2016 2:45 am
by SixT5HiPo
SixT5HiPo wrote:This distributor is for sale by eBay member " mysunshine302".

DESCRIPTION: "You are bidding on a 100% original Ford 289 HiPo (K) code service replacement dual point distributor. This 289 HiPo dual point distributor was purchase new from a Ford dealership back in early 70's. ** Recently just go back from being totally restored! All NOS Motorcraft parts. Points & condenser & primary wire & dual point breaker plate & new hardware & bushing. **Comes complete as in all the pictures.*** I am currently selling off all my Ford parts I have been collecting over the last 40+ years. My family and I are now into the New Generation Mustangs. This original 289 HiPo dual point distributor is correct fit for the 1964 1/2 to 1968 289 HiPo (K) code engine in the Shelby GT350 & Mustang GT or Fairlane GT or Torino GT & Falcon & Mercury Comet & AC Shelby Cobra. Correct Shelby part number on Motorcraft aluminum housing is C50F-12127-E. Date code 1D20. Part number cast on housing C5OF-12131-B.
** Looks awesome with a nice looking original patina aluminum housing finish! Ready to install & rev!!!! Would work great if you want to save a *lot of money or if you are totally restoring your original 289 HiPo engine or if you lost your 289 HiPo dual point distributor.**Also correct replacement Hop/Up fit that was used in all the 1969 & 1970 Boss 302 & Tran Am engines. **I have a Buy It Now if it can help you. Or just bid freely. ** Please ask all your question before auction ends.**Remember original Ford parts fit and give the best performance! Shipping fee also includes Full insurance value."

eBay Link


Ended with zero bids.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Mon Jul 18, 2016 9:22 pm
by SixT5HiPo
This used distributor is for sale by eBay member " cardfan51" for $295.00, or make an offer.

DESCRIPTION: "Hello, I have an excellent distributor for sale . It is an original 289/HiPo unit that was sold over the counter at Ford dealerships. It has NOS FoMoCo points, condenser,and new lead wire. This unit was cleaned, bushing is ok, points,lead wire and condenser installed, point gap is .016. However the points have not been lubed. This original casting numbered unit came on the 65-67 289 HiPo and Shelby GT350. Email for more info, Thanks Chris, I also have an original 289 HiPo distributor on here.It looks excellent! Has NOS points ,condenser,and rotor button. I would make someone a wonderfully priced package on the 2 units ,(You won't believe how low the price is)! Next week I will post a C5AF 12127 E Dual point 390 427 428 over the counter unit. Has NOS points ,condenser and rotor button . This is an Autolite unit. If someone wanted a really good deal on all three ,just let me know .I will price them as a set of 3!"

eBay Link

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Fri Jul 22, 2016 4:10 pm
by SixT5HiPo
SixT5HiPo wrote:This distributor is for sale by eBay member " mysunshine302".

DESCRIPTION: "You are bidding on a 100% original Ford 289 HiPo (K) code service replacement dual point distributor. This 289 HiPo dual point distributor was purchase new from a Ford dealership back in early 70's. ** Recently just go back from being totally restored! All NOS Motorcraft parts. Points & condenser & primary wire & dual point breaker plate & new hardware & bushing. **Comes complete as in all the pictures.*** I am currently selling off all my Ford parts I have been collecting over the last 40+ years. My family and I are now into the New Generation Mustangs. This original 289 HiPo dual point distributor is correct fit for the 1964 1/2 to 1968 289 HiPo (K) code engine in the Shelby GT350 & Mustang GT or Fairlane GT or Torino GT & Falcon & Mercury Comet & AC Shelby Cobra. Correct Shelby part number on Motorcraft aluminum housing is C50F-12127-E. Date code 1D20. Part number cast on housing C5OF-12131-B.
** Looks awesome with a nice looking original patina aluminum housing finish! Ready to install & rev!!!! Would work great if you want to save a *lot of money or if you are totally restoring your original 289 HiPo engine or if you lost your 289 HiPo dual point distributor.**Also correct replacement Hop/Up fit that was used in all the 1969 & 1970 Boss 302 & Tran Am engines. **I have a Buy It Now if it can help you. Or just bid freely. ** Please ask all your question before auction ends.**Remember original Ford parts fit and give the best performance! Shipping fee also includes Full insurance value."

eBay Link

Ended with zero bids.


Relisted HERE

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sat Aug 06, 2016 2:25 am
by SixT5HiPo
SixT5HiPo wrote:This distributor is for sale by eBay member " mysunshine302".

DESCRIPTION: "You are bidding on a 100% original Ford 289 HiPo (K) code service replacement dual point distributor. This 289 HiPo dual point distributor was purchase new from a Ford dealership back in early 70's. ** Recently just go back from being totally restored! All NOS Motorcraft parts. Points & condenser & primary wire & dual point breaker plate & new hardware & bushing. **Comes complete as in all the pictures.*** I am currently selling off all my Ford parts I have been collecting over the last 40+ years. My family and I are now into the New Generation Mustangs. This original 289 HiPo dual point distributor is correct fit for the 1964 1/2 to 1968 289 HiPo (K) code engine in the Shelby GT350 & Mustang GT or Fairlane GT or Torino GT & Falcon & Mercury Comet & AC Shelby Cobra. Correct Shelby part number on Motorcraft aluminum housing is C50F-12127-E. Date code 1D20. Part number cast on housing C5OF-12131-B.
** Looks awesome with a nice looking original patina aluminum housing finish! Ready to install & rev!!!! Would work great if you want to save a *lot of money or if you are totally restoring your original 289 HiPo engine or if you lost your 289 HiPo dual point distributor.**Also correct replacement Hop/Up fit that was used in all the 1969 & 1970 Boss 302 & Tran Am engines. **I have a Buy It Now if it can help you. Or just bid freely. ** Please ask all your question before auction ends.**Remember original Ford parts fit and give the best performance! Shipping fee also includes Full insurance value."

eBay Link

Ended with zero bids.

Relisted HERE


SOLD for $260.00.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Wed Aug 10, 2016 9:54 pm
by SixT5HiPo
This MOTORCRAFT distributor was SOLD by eBay member "kmurf2007" for $275.00.

DESCRIPTION: "YOU ARE BIDDING ON A REBUILT ORIGINAL FORD MOTORCRAFT DUAL POINT DISTRIBUTOR. THE FORD ID NUMBER IS C50F 12127 E, DATE CODE 9C27. THIS IS A REBUILT FORD DUAL POINT DISTRIBUTOR THAT WAS SLIGHTLY USED FOR A SHORT PERIOD OF TIME. THE REBUILD CONSISTED OF CLEANING, NEW POINTS, CONDENSOR AND DUAL POINT TO COIL WIRE LEAD. THIS IS FOR A 1965 1966 MUSTANG 289 HIPO (K CODE ENGINE)."

eBay Link

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Wed Aug 10, 2016 10:02 pm
by SixT5HiPo
This "NOS" MOTORCRAFT distributor is for sale by eBay member " fogshotrods " for $659.00, or make an offer.

DESCRIPTION: "NOS FORD MOTORCRAFT DISTRIBUTOR DUAL POINT C5OZ-12127-E FITS 221-260-289-302-351w ci. motors."

eBay Link

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Thu Aug 11, 2016 12:20 am
by C6ZZKGT
SixT5HiPo wrote:This "NOS" MOTORCRAFT distributor is for sale by eBay member " fogshotrods " for $659.00, or make an offer.

DESCRIPTION: "NOS FORD MOTORCRAFT DISTRIBUTOR DUAL POINT C5OZ-12127-E FITS 221-260-289-302-351w ci. motors."

eBay Link


If this is supposed to be new, it sure has a lot of dirt build up on it. The casting looks to have been lightly polished.

-Fred-

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Thu Aug 11, 2016 9:40 pm
by SixT5HiPo
C6ZZKGT wrote:
If this is supposed to be new, it sure has a lot of dirt build up on it.

-Fred-


That's what I think as well. It's why it's posted in the "USED" thread...

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Thu Aug 11, 2016 9:44 pm
by SixT5HiPo
C6ZZKGT wrote:The casting looks to have been lightly polished.

-Fred-


At least seller does state that “It was polished and installed on a display motor in my speed shop BUT never run”.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Sep 11, 2016 5:09 pm
by SixT5HiPo
SixT5HiPo wrote:This "NOS" MOTORCRAFT distributor is for sale by eBay member " fogshotrods " for $659.00, or make an offer.

DESCRIPTION: "NOS FORD MOTORCRAFT DISTRIBUTOR DUAL POINT C5OZ-12127-E FITS 221-260-289-302-351w ci. motors."

eBay Link


Ended with NO sale.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Sep 11, 2016 5:11 pm
by SixT5HiPo
SixT5HiPo wrote:This "NOS" MOTORCRAFT distributor is for sale by eBay member " fogshotrods " for $659.00, or make an offer.

DESCRIPTION: "NOS FORD MOTORCRAFT DISTRIBUTOR DUAL POINT C5OZ-12127-E FITS 221-260-289-302-351w ci. motors."

eBay Link

Ended with NO sale.


Relisted HERE.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Sep 11, 2016 5:15 pm
by SixT5HiPo
HERE'S an interesting listing for what appears to be a dual point distributor with a "universal" style housing. Judge for yourself.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Sep 11, 2016 6:55 pm
by C6ZZKGT
SixT5HiPo wrote:HERE'S an interesting listing for what appears to be a dual point distributor with a "universal" style housing. Judge for yourself.


This is one of the late production NOS Motorcraft distributors where they ran out of dual point housings and converted single point housings.

-Fred-

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Sep 11, 2016 7:41 pm
by SixT5HiPo
HERE'S an interesting listing for what appears to be a dual point distributor with a "universal" style housing. Judge for yourself.

This is one of the late production NOS Motorcraft distributors where they ran out of dual point housings and converted single point housings.

-Fred-


That's correct...And in today's world of "Concours" restorations, this would be the last choice to fire a K motor for the money.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Sun Sep 18, 2016 7:55 pm
by SixT5HiPo
SixT5HiPo wrote:HERE'S an interesting listing for what appears to be a dual point distributor with a "universal" style housing. Judge for yourself.


Ended with NO sale.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Mon Sep 26, 2016 7:18 am
by C6ZZKGT
SixT5HiPo wrote:
SixT5HiPo wrote:HERE'S an interesting listing for what appears to be a dual point distributor with a "universal" style housing. Judge for yourself.


Ended with NO sale.


This distributor is back on Ebay again with no changes:

http://www.ebay.com/itm/112149022915?ss ... :MEWAX:VRI

-Fred-

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Mon Sep 26, 2016 10:04 pm
by SixT5HiPo
SixT5HiPo wrote:
SixT5HiPo wrote:This "NOS" MOTORCRAFT distributor is for sale by eBay member " fogshotrods " for $659.00, or make an offer.

DESCRIPTION: "NOS FORD MOTORCRAFT DISTRIBUTOR DUAL POINT C5OZ-12127-E FITS 221-260-289-302-351w ci. motors."

eBay Link

Ended with NO sale.

Relisted HERE.


This listing was ended by the seller because there was an error in the listing

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Tue Oct 04, 2016 10:05 pm
by SixT5HiPo
HERE'S an interesting listing for what appears to be a dual point distributor with a "universal" style housing. Judge for yourself.

Ended with NO sale.

This distributor is back on Ebay again with no changes:

http://www.ebay.com/itm/112149022915?ss ... :MEWAX:VRI



Ended with NO sale.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Fri Dec 09, 2016 10:40 pm
by SixT5HiPo
THIS used MOTORCRAFT distributor is for sale with no reserve by eBay member " tymack " .

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Thu Dec 15, 2016 9:57 am
by C6ZZKGT
SixT5HiPo wrote:THIS used MOTORCRAFT distributor is for sale with no reserve by eBay member " tymack " .


This distributor sold December 14, 2016 on Ebay for $177.50 with 12 bids from 7 bidders.

-Fred-

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Thu Feb 16, 2017 3:59 am
by SixT5HiPo
THIS used MOTORCRAFT dual point distributor is for sale by eBay member " gt35067 " for $350.00.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Mon Feb 20, 2017 4:02 am
by SixT5HiPo
SixT5HiPo wrote:THIS used MOTORCRAFT dual point distributor is for sale by eBay member " gt35067 " for $350.00.


SOLD for the asking price.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Mon Feb 20, 2017 4:06 am
by SixT5HiPo
HERE'S a used MOTORCRAFT dual point distributor housing for sale by eBay member " snow1202 " with a starting bid of $125.68, and a Buy it Now price of $165.78.

Re: USED MOTORCRAFT Dual Point Distributor

PostPosted: Tue Mar 07, 2017 3:51 am
by SixT5HiPo
SixT5HiPo wrote:HERE'S a used MOTORCRAFT dual point distributor housing for sale by eBay member " snow1202 " with a starting bid of $125.68, and a Buy it Now price of $165.78.


SOLD for $139.27 [ 2 bids ]