Used 9" Pinion Snubber and Bracket

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Sun Aug 14, 2016 6:53 pm

It's been a while since we've seen one of these for sale on eBay...This one is for sale by member "toobadmustsell" and is priced at $349.99.

DESCRIPTION: "FORD 9" REAR END 3rd MEMBER PINION BUMPER SUPPORT BRACKET with rubber bumper ,Excellent Condition,will work with some 1965 and all 1966 1967 Cars that came with 289 K HI-PO engine, with all cars that has 9 inch rear ends ,as SHELBY,MUSTANG,FAIRLANE and others ,I have been told that the 1964 and some early 1965 are not the same as this one,the side on the right goes down more,I think its more of the time or date the car was build for 1965, but all 1966,1967 will work with this bracket, will also work with noduar iron supports and standerd supports,has been cleaned and bead-blasted and painted with cast paint for that factory look and readly to install.Please look at pictures to determine conditon and ask questions..Look at other items up for auction.Will combine shipping to save you money.Satisfaction is Guaranteed,If not satisfied E- mail within 14 days,you can send item back for full refund less shipping."

eBay Link
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby C6ZZKGT » Sun Aug 14, 2016 7:00 pm

SixT5HiPo wrote:It's been a while since we've seen one of these for sale on eBay...This one is for sale by member "toobadmustsell" and is priced at $349.99.

DESCRIPTION: "FORD 9" REAR END 3rd MEMBER PINION BUMPER SUPPORT BRACKET with rubber bumper ,Excellent Condition,will work with some 1965 and all 1966 1967 Cars that came with 289 K HI-PO engine, with all cars that has 9 inch rear ends ,as SHELBY,MUSTANG,FAIRLANE and others ,I have been told that the 1964 and some early 1965 are not the same as this one,the side on the right goes down more,I think its more of the time or date the car was build for 1965, but all 1966,1967 will work with this bracket, will also work with noduar iron supports and standerd supports,has been cleaned and bead-blasted and painted with cast paint for that factory look and readly to install.Please look at pictures to determine conditon and ask questions..Look at other items up for auction.Will combine shipping to save you money.Satisfaction is Guaranteed,If not satisfied E- mail within 14 days,you can send item back for full refund less shipping."

eBay Link


This design is for the 1966 model year only and it began around October of 1965. 1966 model cars prior to that used the different 1965 style.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 6203
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Sun Aug 14, 2016 7:08 pm

It's been a while since we've seen one of these for sale on eBay...This one is for sale by member "toobadmustsell" and is priced at $349.99.

DESCRIPTION: "FORD 9" REAR END 3rd MEMBER PINION BUMPER SUPPORT BRACKET with rubber bumper ,Excellent Condition,will work with some 1965 and all 1966 1967 Cars that came with 289 K HI-PO engine, with all cars that has 9 inch rear ends ,as SHELBY,MUSTANG,FAIRLANE and others ,I have been told that the 1964 and some early 1965 are not the same as this one,the side on the right goes down more,I think its more of the time or date the car was build for 1965, but all 1966,1967 will work with this bracket, will also work with noduar iron supports and standerd supports,has been cleaned and bead-blasted and painted with cast paint for that factory look and readly to install.Please look at pictures to determine conditon and ask questions..Look at other items up for auction.Will combine shipping to save you money.Satisfaction is Guaranteed,If not satisfied E- mail within 14 days,you can send item back for full refund less shipping."

eBay Link

This design is for the 1966 model year only and it began around October of 1965. 1966 model cars prior to that used the different 1965 style.

-Fred-


Thanks for the clarification. The seller sort of leaves the details for us to sort out.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Thu Sep 01, 2016 9:14 pm

SixT5HiPo wrote:It's been a while since we've seen one of these for sale on eBay...This one is for sale by member "toobadmustsell" and is priced at $349.99.

DESCRIPTION: "FORD 9" REAR END 3rd MEMBER PINION BUMPER SUPPORT BRACKET with rubber bumper ,Excellent Condition,will work with some 1965 and all 1966 1967 Cars that came with 289 K HI-PO engine, with all cars that has 9 inch rear ends ,as SHELBY,MUSTANG,FAIRLANE and others ,I have been told that the 1964 and some early 1965 are not the same as this one,the side on the right goes down more,I think its more of the time or date the car was build for 1965, but all 1966,1967 will work with this bracket, will also work with noduar iron supports and standerd supports,has been cleaned and bead-blasted and painted with cast paint for that factory look and readly to install.Please look at pictures to determine conditon and ask questions..Look at other items up for auction.Will combine shipping to save you money.Satisfaction is Guaranteed,If not satisfied E- mail within 14 days,you can send item back for full refund less shipping."

eBay Link


SOLD for $314.99. WoW
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Mon Dec 25, 2017 7:22 pm

It's been a while since we've seen one of these for sale on eBay...THIS one is for sale by member "jollyroge" and has a starting bid of $0.99.

"Original 65 Shelby GT350 Mustang K code 289 Hi-Po 9” Ford rear end snubber. Here is an original pinion snubber for 1965 289 Hi –Po or K code Mustang . These are unique to 1965 only 289 Hi-Po 9” Ford rear ends. It bolts onto the pinion support of the rear end removable center section. The Ford part number for this unit would be C5ZZ-4298-A . It is the proper shallow measurement of 2.5” as compared to the later 3.5” deep pinion snubbers that came on later cars. This snubber is correct for all 1965 K code Mustangs and 1965 GT350 Shelby Mustangs including the 65 ½ carry over or left over cars. This snubber is heavily pitted but can be filled and painted to look perfect . I believe the rubber bumper is a slightly later replacement that looks similar. Perfect repros of the rubber are available. This was removed from a 65 Shelby some time ago. Very hard to find one of these 1965 only snubbers. No reproduction has ever been made of this so an original is you’re your only hope to find one. Winner pays actual shipping charges. Will accept all forms of payment. Good luck bidding !"
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Mon Dec 25, 2017 7:37 pm

HERE'S another used pinion snubber bracket for sale by eBay member " westerndrivetrain " with a starting bid of $60.00, and a Buy it Now price of $400.00. (Note: seller states this is a "service" part that is NOT correct for a '65 application.)

"Up for auction is 1 1966/67 Mustang Cougar 9" pinion snubber HIPO 289 or 390 applications. Has been glass beaded, primed and painted Eastwood Detail gray. Very nice condition.
Part # C5ZZ-4298-A Used before 11/15/66. NOTE: This is not concurs correct for a 65 HIPO car. It is correct as a service part but has distinct design changes.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Tue Dec 26, 2017 9:45 pm

SixT5HiPo wrote:HERE'S another used pinion snubber bracket for sale by eBay member " westerndrivetrain " with a starting bid of $60.00, and a Buy it Now price of $400.00. (Note: seller states this is a "service" part that is NOT correct for a '65 application.)

"Up for auction is 1 1966/67 Mustang Cougar 9" pinion snubber HIPO 289 or 390 applications. Has been glass beaded, primed and painted Eastwood Detail gray. Very nice condition.
Part # C5ZZ-4298-A Used before 11/15/66. NOTE: This is not concours correct for a 65 HIPO car. It is correct as a service part but has distinct design changes.


SOLD for $202.50 [ 13 bids ].
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Fri Dec 29, 2017 4:15 am

SixT5HiPo wrote:HERE'S another used pinion snubber bracket for sale by eBay member " westerndrivetrain " with a starting bid of $60.00, and a Buy it Now price of $400.00. (Note: seller states this is a "service" part that is NOT correct for a '65 application.)

"Up for auction is 1 1966/67 Mustang Cougar 9" pinion snubber HIPO 289 or 390 applications. Has been glass beaded, primed and painted Eastwood Detail gray. Very nice condition.
Part # C5ZZ-4298-A Used before 11/15/66. NOTE: This is not concurs correct for a 65 HIPO car. It is correct as a service part but has distinct design changes.


The same seller has another one listed for sale HERE with the same starting bid of $60.00, and a lower Buy it Now price of $200.00.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby C6ZZKGT » Sun Dec 31, 2017 9:30 pm

SixT5HiPo wrote:It's been a while since we've seen one of these for sale on eBay...THIS one is for sale by member "jollyroge" and has a starting bid of $0.99.

"Original 65 Shelby GT350 Mustang K code 289 Hi-Po 9” Ford rear end snubber. Here is an original pinion snubber for 1965 289 Hi –Po or K code Mustang . These are unique to 1965 only 289 Hi-Po 9” Ford rear ends. It bolts onto the pinion support of the rear end removable center section. The Ford part number for this unit would be C5ZZ-4298-A . It is the proper shallow measurement of 2.5” as compared to the later 3.5” deep pinion snubbers that came on later cars. This snubber is correct for all 1965 K code Mustangs and 1965 GT350 Shelby Mustangs including the 65 ½ carry over or left over cars. This snubber is heavily pitted but can be filled and painted to look perfect . I believe the rubber bumper is a slightly later replacement that looks similar. Perfect repros of the rubber are available. This was removed from a 65 Shelby some time ago. Very hard to find one of these 1965 only snubbers. No reproduction has ever been made of this so an original is you’re your only hope to find one. Winner pays actual shipping charges. Will accept all forms of payment. Good luck bidding !"


This snubber and bracket sold December 31, 2017 on Ebay for $382.00 with 19 bids from 10 bidders.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 6203
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Sun Dec 31, 2017 10:37 pm

C6ZZKGT wrote:It's been a while since we've seen one of these for sale on eBay...THIS one is for sale by member "jollyroge" and has a starting bid of $0.99.

"Original 65 Shelby GT350 Mustang K code 289 Hi-Po 9” Ford rear end snubber. Here is an original pinion snubber for 1965 289 Hi –Po or K code Mustang . These are unique to 1965 only 289 Hi-Po 9” Ford rear ends. It bolts onto the pinion support of the rear end removable center section. The Ford part number for this unit would be C5ZZ-4298-A . It is the proper shallow measurement of 2.5” as compared to the later 3.5” deep pinion snubbers that came on later cars. This snubber is correct for all 1965 K code Mustangs and 1965 GT350 Shelby Mustangs including the 65 ½ carry over or left over cars. This snubber is heavily pitted but can be filled and painted to look perfect . I believe the rubber bumper is a slightly later replacement that looks similar. Perfect repros of the rubber are available. This was removed from a 65 Shelby some time ago. Very hard to find one of these 1965 only snubbers. No reproduction has ever been made of this so an original is you’re your only hope to find one. Winner pays actual shipping charges. Will accept all forms of payment. Good luck bidding !"

This snubber and bracket sold December 31, 2017 on Ebay for $382.00 with 19 bids from 10 bidders.

-Fred-


Interesting auction that had a total of 34 bids including "automitc" bids.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Sun Dec 31, 2017 10:43 pm

HERE'S a used later version snubber and bracket for sale by eBay member " themustangranch-ii " for $300.00, or make an offer.

"YOU ARE LOOKING AT A GOOD USED ORIGINAL 67 - 70 SHELBY BOSS MUSTANG CJ 9" REAR END THIRD MEMBER DIFFERENTIAL PINION SNUBBER AND BRACKET ASSEMBLY -- VERY NICE USED CONDITION -- PART NUMBER IS STILL VERY CLEAR ALONG WITH A DATE CODE OF AY 30B -- NICE PIECE FOR ANY CONCOURSE RESTORATION ."
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby C6ZZKGT » Mon Jan 01, 2018 8:23 am

SixT5HiPo wrote:HERE'S a used later version snubber and bracket for sale by eBay member " themustangranch-ii " for $300.00, or make an offer.

"YOU ARE LOOKING AT A GOOD USED ORIGINAL 67 - 70 SHELBY BOSS MUSTANG CJ 9" REAR END THIRD MEMBER DIFFERENTIAL PINION SNUBBER AND BRACKET ASSEMBLY -- VERY NICE USED CONDITION -- PART NUMBER IS STILL VERY CLEAR ALONG WITH A DATE CODE OF AY 30B -- NICE PIECE FOR ANY CONCOURSE RESTORATION ."


This is actually incorrect for a 67 model which would be our only interest on this forum. This is the fault of the seller as far as the error.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 6203
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Mon Jan 01, 2018 8:52 pm

C6ZZKGT wrote:"YOU ARE LOOKING AT A GOOD USED ORIGINAL 67 - 70 SHELBY BOSS MUSTANG CJ 9" REAR END THIRD MEMBER DIFFERENTIAL PINION SNUBBER AND BRACKET ASSEMBLY -- VERY NICE USED CONDITION -- PART NUMBER IS STILL VERY CLEAR ALONG WITH A DATE CODE OF AY 30B -- NICE PIECE FOR ANY CONCOURSE RESTORATION ."

This is actually incorrect for a 67 model which would be our only interest on this forum. This is the fault of the seller as far as the error.

-Fred-


Of course it is...

Buyer beware.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used 9" Pinion Snubber and Bracket

Postby SixT5HiPo » Thu Jan 04, 2018 10:05 pm

SixT5HiPo wrote:HERE'S another used pinion snubber bracket for sale by eBay member " westerndrivetrain " with a starting bid of $60.00, and a Buy it Now price of $400.00. (Note: seller states this is a "service" part that is NOT correct for a '65 application.)

"Up for auction is 1 1966/67 Mustang Cougar 9" pinion snubber HIPO 289 or 390 applications. Has been glass beaded, primed and painted Eastwood Detail gray. Very nice condition.
Part # C5ZZ-4298-A Used before 11/15/66. NOTE: This is not concurs correct for a 65 HIPO car. It is correct as a service part but has distinct design changes.

The same seller has another one listed for sale HERE with the same starting bid of $60.00, and a lower Buy it Now price of $200.00.


SOLD for 160.38 [ 16 bids ].
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA


Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: No registered users and 1 guest