Used C5DA-6394-A 6 Bolt Bellhousing

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Wed Feb 08, 2012 12:20 am

Here's a used "HiPo" 6 bolt bellhousing that was SOLD for $79.45 by eBay member "jollyroge". (As far as I know, this bellhousing is not specific to only the 289 High Performance engines.)

DESCRIPTION: "Ford 289 Hi-Po bell housing for 65 - 66 Shelby GT350 Mustang. Here is a original bell housing that was removed from a 289 Hi-Po engine. It has the proper part number of C5DA-6394-A on it along with a 65 casting date. This is for the 157 tooth / 10.5” clutch that was correct for the 64-67 era flywheels. It is in real nice shape with no striped holes cracks or repairs. These are getting harder to find especially with no cracks or issues. Winner pays actual UPS shipping. Good luck bidding!"

eBay Link

Image Image Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Wed Feb 08, 2012 7:58 am

Very reasonable price for such a clean bellhousing.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Thu Feb 09, 2012 12:39 am

C6ZZKGT wrote:Very reasonable price for such a clean bellhousing.

-Fred-


You got that right. If I needed a replacement bell, that's one I'd buy.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Tue Mar 13, 2012 10:54 pm

Here's a used 6 bolt bell housing that was SOLD by eBay member "motoys2001" for $150.00.

DESCRIPTION: "THIS IS AN ORIGINAL 1965-1968 FORD OR MERCURY ALUMINUM STICK SHIFT BELL HOUSING FOR CARS EQUIPPED WITH A SMALL BLOCK SIX BOLT 289 OR 302 WITH A 157 TOOTH FLYWHEEL. IT IS CORRECT FOR 3 AND 4 SPEED EQUIPPED FALCON, MUSTANG, COMET, EARLY MAVERICK AND 1965-1967 289 HIPO 4 SPEED FROM 8/20/64. THIS BELL HOUSING HAS FORD PART NUMBER OF C5DA-6394-A (SEE PIC). THIS UNIT IS CORRECT FOR BORG WARNER T10 AND FORD TOPLOADER TRANSMISSIONS. PLEASE DO YOUR OWN RESEARCH TO SEE IF THIS UNIT WILL WORK FOR YOUR APPLICATION BEFORE BIDDING. THIS UNIT IS ALUMINUM AND IS IN VERY GOOD CONDITION. INCLUDED IN THIS AUCTION IS THE BELL HOUSING AND THE CLUTCH FORK. THERE ARE NO CRACKS OR DAMAGE ANYWHERE ON THIS UNIT. THERE ARE NO STRIPPED HOLES OR HELI-COILS AND THE HOUSING MOUNTING AND DOWEL HOLES ARE IN GREAT SHAPE. FOR YOU NUMBERS MATCHING GUYS, THE DATE CODE HAS 10 DOTS WITH A 64. I WAS TOLD THAT IT DECODES TO OCT.1964. THE OTHER STAMPINGS READ: "FOMOCO" "SHEFFIELD 2" (SEE PICS). THIS UNIT IS READY TO BOLT ON AND GO."

eBay Link

Image Image

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Thu Mar 15, 2012 10:59 pm

This used bell is for sale with NO reserve by eBay member "57basicbob".

DESCRIPTION: "Up for NO RESERVE auction is a 1965 - 1967 Ford Mustang 289 V8 6 bolt bell Housing with Ford # C5DA-6394-A. This belonged to my late father who was a Mustang enthusiast, and he aquired this part in the 70's. It now needs to go to your house!

There are no broken tabs, no cracks & all threads appear to be very nice. There is a professional 3" weld on the inside, but there is no evidence of a repair from the outside - (see last two photos) - 1 inside & 1 outside picture of this area. Maybe it was repaired at the factory????? I don't know?????

This weighs just under 14 pounds boxed - I have offered 3 shipping options for U.S. the buyers."

eBay Link

Image Image
Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Sun Mar 18, 2012 12:04 am

SixT5HiPo wrote:This used bell is for sale with NO reserve by eBay member "57basicbob".

DESCRIPTION: "Up for NO RESERVE auction is a 1965 - 1967 Ford Mustang 289 V8 6 bolt bell Housing with Ford # C5DA-6394-A. This belonged to my late father who was a Mustang enthusiast, and he aquired this part in the 70's. It now needs to go to your house!

There are no broken tabs, no cracks & all threads appear to be very nice. There is a professional 3" weld on the inside, but there is no evidence of a repair from the outside - (see last two photos) - 1 inside & 1 outside picture of this area. Maybe it was repaired at the factory????? I don't know?????

This weighs just under 14 pounds boxed - I have offered 3 shipping options for U.S. the buyers."

eBay Link



SOLD for only $69.00.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Fri Apr 06, 2012 11:48 pm

This bell housing was SOLD by eBay member "blefore" for $59.69.

DESCRIPTION: "67 Mustang 289 HiPO K Code 4 Speed Bellhousing. OEM. C5DA-6394-A. Shelby. No broken mounting points. All threads in great shape. Dated March 67."

eBay Link

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Mon Apr 09, 2012 12:04 am

This used bellhousing was SOLD for $125.00 by eBay member "ladyluck_ma".

DESCRIPTION: "THIS IS A VERY NICE, USED BELLHOUSING FOR THE FOLLOWING: 65-66 289 Falcon 2v 3/4sp, 65-68 289 Mustang 2v 3/4sp, 65-67 289 HiPo Mustang 4sp (from_8/20/64)
65-67 289 Mustang Falcon 4v-PF 4sp , 70+ 302 Maverick w/MT. ALL BUT 1 THREADED HOLE ARE GOOD, ONE THAT HOLDS THE BLOCK PLATE DOWN IS A LITTLE IFFY, YOU MAY WANT TO PUT A HELICOIL IN."

eBay Link


Image Image

Image Image

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Mon Sep 03, 2012 6:57 pm

This used bellhousing was SOLD for $100.00 by eBay member "bambie930".

DESCRIPTION: "Original Ford Bellhousing that is correct for factory 65/67 289 "K" code Hipo engine. Marked C5DA-6394-A on bellhousing. There is one ear broke offf bellhousing which will not affect operation at all. Comes complete with block plate and clutch fork (I see no numbers) and new boot. Ready to bolt on !!! This will also fit all 65/68 Mustang 4 speed small blocks and 65/66 Falcons small blocks. One of these sold last week for $161.00 in not near this condition !!! NO RESERVE."

eBay Link

Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Sat Feb 16, 2013 9:01 pm

This used bellhousing was SOLD by eBay member "h20pt" for $199.00.

DESCRIPTION: "1965-67 289 Hipo FORD Mustang 4 speed Bell housing. No damage."

eBay Link

Image Image

Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Thu Oct 26, 2017 10:38 pm

THIS used aluminum bell housing is for sale by eBay member "magmustangs" with a starting bid of $249.00.

"1965-1968 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT-350, Mercury Cougar, XR7.. 289 2v-4v-Hipo 4-SPEED '6-BOLT' TRANSMISSION BELLHOUSING. For 157 Tooth Flywheel. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) and C5DA-6394-A and dated (7...65).. Removed from a 1966 Mustang with 289 HIPO and 4-Speed Manual Trans. The Bell Housing is in Great Condition. No Cracks, Chips or Damage. Nice Mounting Surfaces and Good Bolt threads, No Stripped threads. ... No Rust or Corrosion. The Inside looks Great. The mount bracket for the clutch fork is still tightly attached. The housing is very clean. Overall, this is a Great Original 289 4-Speed Bell-Housing. IMPOSSIBLE TO FIND ORIGINAL. Please email with any questions."
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Thu Oct 26, 2017 10:45 pm

HERE'S a used bell for sale by eBay member "old-dominion-mustang-camaro" for $189.99.

“Does have one break at guide hole, as seen in pictures. Original Quality - Original Fit - Original Strength.”
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Fri Oct 27, 2017 9:14 am

SixT5HiPo wrote:HERE'S a used bell for sale by eBay member "old-dominion-mustang-camaro" for $189.99.

“Does have one break at guide hole, as seen in pictures. Original Quality - Original Fit - Original Strength.”


The break at the guide hole seems to be a fairly common issue with these aluminum bell housings.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Fri Oct 27, 2017 5:02 pm

C6ZZKGT wrote:HERE'S a used bell for sale by eBay member "old-dominion-mustang-camaro" for $189.99.

“Does have one break at guide hole, as seen in pictures. Original Quality - Original Fit - Original Strength.”

The break at the guide hole seems to be a fairly common issue with these aluminum bell housings.

-Fred-


At least the seller has made full disclosure regarding the break.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Tue Oct 31, 2017 8:23 am

SixT5HiPo wrote:
C6ZZKGT wrote:HERE'S a used bell for sale by eBay member "old-dominion-mustang-camaro" for $189.99.

“Does have one break at guide hole, as seen in pictures. Original Quality - Original Fit - Original Strength.”

The break at the guide hole seems to be a fairly common issue with these aluminum bell housings.

-Fred-


At least the seller has made full disclosure regarding the break.


This used bellhousing sold October 31, 2017 on Ebay for $189.99.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Tue Oct 31, 2017 8:24 am

C6ZZKGT wrote:
SixT5HiPo wrote:
C6ZZKGT wrote:HERE'S a used bell for sale by eBay member "old-dominion-mustang-camaro" for $189.99.

“Does have one break at guide hole, as seen in pictures. Original Quality - Original Fit - Original Strength.”

The break at the guide hole seems to be a fairly common issue with these aluminum bell housings.

-Fred-


At least the seller has made full disclosure regarding the break.


This used bellhousing sold October 31, 2017 on Ebay for $189.99.

-Fred-


To me this represents one of the higher prices that I have seen for one of these bellhousings. Especially considering that it is not perfect.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Tue Oct 31, 2017 4:55 pm

C6ZZKGT wrote:
This used bellhousing sold October 31, 2017 on Ebay for $189.99.

To me this represents one of the higher prices that I have seen for one of these bellhousings. Especially considering that it is not perfect.

-Fred-


HERE'S another six bolt bell for sale at a fixed price of $210.00 by eBay member " metlcwest ".

"THIS IS AN ORIGINAL FORD BELL HOUSING IT HAS BEEN VATTED BEAD BLASTED AND PAINTED. ALL THREADS HAVE BEEN CHASED . NO CRACKS . FORK INCLUDED. SPRING AVAILABLE BUT NOT INCLUDED. C5DA-6394-A"
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Tue Oct 31, 2017 6:02 pm

SixT5HiPo wrote:
C6ZZKGT wrote:
This used bellhousing sold October 31, 2017 on Ebay for $189.99.

To me this represents one of the higher prices that I have seen for one of these bellhousings. Especially considering that it is not perfect.

-Fred-


HERE'S another six bolt bell for sale at a fixed price of $210.00 by eBay member " metlcwest ".

"THIS IS AN ORIGINAL FORD BELL HOUSING IT HAS BEEN VATTED BEAD BLASTED AND PAINTED. ALL THREADS HAVE BEEN CHASED . NO CRACKS . FORK INCLUDED. SPRING AVAILABLE BUT NOT INCLUDED. C5DA-6394-A"


At least this one includes a fork.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Tue Oct 31, 2017 6:37 pm

C6ZZKGT wrote:
SixT5HiPo wrote:
C6ZZKGT wrote:
This used bellhousing sold October 31, 2017 on Ebay for $189.99.

To me this represents one of the higher prices that I have seen for one of these bellhousings. Especially considering that it is not perfect.

-Fred-


HERE'S another six bolt bell for sale at a fixed price of $210.00 by eBay member " metlcwest ".

"THIS IS AN ORIGINAL FORD BELL HOUSING IT HAS BEEN VATTED BEAD BLASTED AND PAINTED. ALL THREADS HAVE BEEN CHASED . NO CRACKS . FORK INCLUDED. SPRING AVAILABLE BUT NOT INCLUDED. C5DA-6394-A"


At least this one includes a fork.

-Fred-


What about the knife and spoon? :? :lol:
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Sat Nov 04, 2017 2:43 am

SixT5HiPo wrote:THIS used aluminum bell housing is for sale by eBay member "magmustangs" with a starting bid of $249.00.

"1965-1968 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT-350, Mercury Cougar, XR7.. 289 2v-4v-Hipo 4-SPEED '6-BOLT' TRANSMISSION BELLHOUSING. For 157 Tooth Flywheel. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) and C5DA-6394-A and dated (7...65).. Removed from a 1966 Mustang with 289 HIPO and 4-Speed Manual Trans. The Bell Housing is in Great Condition. No Cracks, Chips or Damage. Nice Mounting Surfaces and Good Bolt threads, No Stripped threads. ... No Rust or Corrosion. The Inside looks Great. The mount bracket for the clutch fork is still tightly attached. The housing is very clean. Overall, this is a Great Original 289 4-Speed Bell-Housing. IMPOSSIBLE TO FIND ORIGINAL. Please email with any questions."


Ended with NO bids.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Sat Nov 04, 2017 2:44 am

SixT5HiPo wrote:THIS used aluminum bell housing is for sale by eBay member "magmustangs" with a starting bid of $249.00.

"1965-1968 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT-350, Mercury Cougar, XR7.. 289 2v-4v-Hipo 4-SPEED '6-BOLT' TRANSMISSION BELLHOUSING. For 157 Tooth Flywheel. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) and C5DA-6394-A and dated (7...65).. Removed from a 1966 Mustang with 289 HIPO and 4-Speed Manual Trans. The Bell Housing is in Great Condition. No Cracks, Chips or Damage. Nice Mounting Surfaces and Good Bolt threads, No Stripped threads. ... No Rust or Corrosion. The Inside looks Great. The mount bracket for the clutch fork is still tightly attached. The housing is very clean. Overall, this is a Great Original 289 4-Speed Bell-Housing. IMPOSSIBLE TO FIND ORIGINAL. Please email with any questions."

Ended with NO bids.


Relisted with NO changes HERE .
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Wed Nov 08, 2017 8:04 pm

C6ZZKGT wrote:
SixT5HiPo wrote:
C6ZZKGT wrote:
This used bellhousing sold October 31, 2017 on Ebay for $189.99.

To me this represents one of the higher prices that I have seen for one of these bellhousings. Especially considering that it is not perfect.

-Fred-


HERE'S another six bolt bell for sale at a fixed price of $210.00 by eBay member " metlcwest ".

"THIS IS AN ORIGINAL FORD BELL HOUSING IT HAS BEEN VATTED BEAD BLASTED AND PAINTED. ALL THREADS HAVE BEEN CHASED . NO CRACKS . FORK INCLUDED. SPRING AVAILABLE BUT NOT INCLUDED. C5DA-6394-A"


At least this one includes a fork.

-Fred-


What about the knife and spoon? :? :lol:[/quote]

This bell housing and fork received no bids by November 8, 2017 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby C6ZZKGT » Wed Nov 08, 2017 8:05 pm

C6ZZKGT wrote:
SixT5HiPo wrote:
C6ZZKGT wrote:
This used bellhousing sold October 31, 2017 on Ebay for $189.99.

To me this represents one of the higher prices that I have seen for one of these bellhousings. Especially considering that it is not perfect.

-Fred-


HERE'S another six bolt bell for sale at a fixed price of $210.00 by eBay member " metlcwest ".

"THIS IS AN ORIGINAL FORD BELL HOUSING IT HAS BEEN VATTED BEAD BLASTED AND PAINTED. ALL THREADS HAVE BEEN CHASED . NO CRACKS . FORK INCLUDED. SPRING AVAILABLE BUT NOT INCLUDED. C5DA-6394-A"


At least this one includes a fork.

-Fred-


What about the knife and spoon? :? :lol:[/quote]

This bell housing and fork received no bids by November 8, 2017 and therefore did NOT sell.

-Fred-[/quote]

This used bell housing and fork is back on Ebay again with no changes:

https://www.ebay.com/itm/69-70-FORD-MUS ... 99?vxp=mtr

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5834
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Tue Nov 14, 2017 9:54 pm

THIS used aluminum bell housing is for sale by eBay member "magmustangs" with a starting bid of $249.00.

"1965-1968 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT-350, Mercury Cougar, XR7.. 289 2v-4v-Hipo 4-SPEED '6-BOLT' TRANSMISSION BELLHOUSING. For 157 Tooth Flywheel. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) and C5DA-6394-A and dated (7...65).. Removed from a 1966 Mustang with 289 HIPO and 4-Speed Manual Trans. The Bell Housing is in Great Condition. No Cracks, Chips or Damage. Nice Mounting Surfaces and Good Bolt threads, No Stripped threads. ... No Rust or Corrosion. The Inside looks Great. The mount bracket for the clutch fork is still tightly attached. The housing is very clean. Overall, this is a Great Original 289 4-Speed Bell-Housing. IMPOSSIBLE TO FIND ORIGINAL. Please email with any questions."

Ended with NO bids.

Relisted with NO changes HERE .


Ended and NOT sold.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5DA-6394-A 6 Bolt Bellhousing

Postby SixT5HiPo » Tue Nov 14, 2017 9:55 pm

SixT5HiPo wrote:THIS used aluminum bell housing is for sale by eBay member "magmustangs" with a starting bid of $249.00.

"1965-1968 Ford Mustang, Fastback, Coupe, Convertible, GT, Shelby GT-350, Mercury Cougar, XR7.. 289 2v-4v-Hipo 4-SPEED '6-BOLT' TRANSMISSION BELLHOUSING. For 157 Tooth Flywheel. This is an ORIGINAL FORD PART. Casting Number (FoMoCo) and C5DA-6394-A and dated (7...65).. Removed from a 1966 Mustang with 289 HIPO and 4-Speed Manual Trans. The Bell Housing is in Great Condition. No Cracks, Chips or Damage. Nice Mounting Surfaces and Good Bolt threads, No Stripped threads. ... No Rust or Corrosion. The Inside looks Great. The mount bracket for the clutch fork is still tightly attached. The housing is very clean. Overall, this is a Great Original 289 4-Speed Bell-Housing. IMPOSSIBLE TO FIND ORIGINAL. Please email with any questions."

Ended with NO bids.

Relisted with NO changes HERE .

Ended and NOT sold.


Relisted HERE with NO changes.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6261
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Next

Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: No registered users and 3 guests