Used C4OE-A Carburetor Spacer

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Sun Feb 12, 2012 11:41 pm

Here's a used HiPo carburetor spacer for sale by eBay member "okeeracer". This spacer is used on K code Mustangs.

DESCRIPTION: "You are bidding on a used carburetor spacer plate for the 289-351W motors. Part is in good shape with no issues on it. We have a few of these so that’s why you have seen them up for auction a lot."

eBay Link

Image Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Tue Feb 21, 2012 12:09 am

This spacer was NOT SOLD because the high bid of $34.00 did not meet the reserve.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Mon Apr 02, 2012 9:07 pm

Here's a used spacer that was SOLD for $23.01 by eBay member "brownlee5212".

DESCRIPTION: "Up for auction is a original carb spacer for K code 289 Hi Po's and J code 302's. Part # C4OE-9A589-A."

eBay Link

Image Image

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Wed Apr 04, 2012 10:42 pm

Here's another spacer that was SOLD by eBay member "1970grayvette" for $31.00.

DESCRIPTION: "This is a Ford Autolite carb spacer that I took off a 1965 289 intake. The spacer is in excellent shape. It could stand a little cleaning, but nice shape- Also included is the 4 long, original studs needed to install this spacer and the carb to the intake."

eBay Link

Image Image Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Sat Apr 07, 2012 8:19 pm

This used spacer was SOLD for only $24.99 by eBay member "cobra289v8 ".

DESCRIPTION: "A 1964 Ford 4 Barrel 1" Carb Spacer, will fit Autolite and Holley Carbs, Square Bore, perfect for any Ford Engine 221 260 289 302 351 390 406 428 427, Casting Numbers, C4OE-9A589-E, great shape, looks NOS, ( better than pictures ) cleaned and glass beaded, no cracks or defects."

eBay Link

Image Image

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Thu Apr 26, 2012 11:40 pm

Here's another used spacer that was SOLD for $55.55 by eBay member "aboss429ataol".

DESCRIPTION: "This auction is for a very nice 4V Carburetor Spacer Plate for a 1965 1966 1967 1968 1969 Ford with 289 302 or 351W. This fits all Ford and Mercury products including Mustang Fairlane Torino Falcon Cougar Comet and other Fords. This has the PVC port nipple at the rear. It is in excellent condition ready to install on your engine. Feel free to ask any questions."

eBay Link

Image Image

Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Wed May 02, 2012 9:50 pm

This spacer was SOLD for $26.69 [ 5 bids ] by eBay member "jeff66gtd2pp".

DESCRIPTION: "This is a no reserve auction for an original 65 Mustang 289 carb spacer. The number is FOMOCO C40E-9A589. This was removed from a November 1964 289 A code Mustang engine.
It's in great shape with no damage, just needs clean up."

eBay Link

Image Image

'
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Sun May 06, 2012 10:29 pm

This spacer was SOLD for $35.00 by eBay member "juliep6".

DESCRIPTION: "Up for auction is a original carburetor spacer. Ford 289 Hipo Autolite 4100 Carb Spacer Plate C4OE-9A589 Mustang Fairlane. This is an original spacer with all of the Ford original part numbers in excellent condition!"

eBay LOink

Image Image

Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Fri Jun 15, 2012 10:51 pm

This used spacer was SOLD for $55.55 by eBay member "aboss429ataol".

DESCRIPTION: "This auction is for a very nice 4V Carburetor Spacer Plate for a 1965 1966 1967 1968 1969 Ford with 289 302 or 351W. This fits all Ford and Mercury products including Mustang Fairlane Torino Falcon Cougar Comet and other Fords. This has the PVC port nipple at the rear. It is in excellent condition ready to install on your engine. Feel free to ask any questions."

eBay Link

Image Image

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Sat Dec 31, 2016 12:01 pm

Here's a used HiPo carburetor spacer for sale by eBay member " member110309" with a Buy-It-Now of $39.95.

1964 HIPO aluminum 1" spacer from a mustang fastback that was sold years ago. Sold the intake last month. Finally found the spacer.

http://www.ebay.com/itm/1964-1969-FORD- ... 7675.l2557

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Sat Dec 31, 2016 12:02 pm

C6ZZKGT wrote:Here's a used HiPo carburetor spacer for sale by eBay member " member110309" with a Buy-It-Now of $39.95.

1964 HIPO aluminum 1" spacer from a mustang fastback that was sold years ago. Sold the intake last month. Finally found the spacer.

http://www.ebay.com/itm/1964-1969-FORD- ... 7675.l2557

-Fred-


This spacer sold December 30, 2016 on Ebay for $39.95.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Wed Jan 11, 2017 10:55 pm

Here is a used HiPo carburetor spacer for sale by eBay member "shanty137" with a starting bid of $94.00 and a Buy-It-Now of $129.00:

You are bidding on 1 used 4v original Ford carburetor spacer with vacuum fitting on the back. This may have come on various early Ford / Mercury applications. The casting engineering number is C3OE-9A589-E , i will list this as application unknown, but from what i was able to find on the internet, this might be correct for early 289 Hipo applications, including Tiger and Cobra ?. Please confirm this is correct for your application prior to bidding, I do not accept returns

http://www.ebay.com/itm/Hipo-289-Cobra- ... 7675.l2557

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Wed Jan 11, 2017 10:56 pm

C6ZZKGT wrote:Here is a used HiPo carburetor spacer for sale by eBay member "shanty137" with a starting bid of $94.00 and a Buy-It-Now of $129.00:

You are bidding on 1 used 4v original Ford carburetor spacer with vacuum fitting on the back. This may have come on various early Ford / Mercury applications. The casting engineering number is C3OE-9A589-E , i will list this as application unknown, but from what i was able to find on the internet, this might be correct for early 289 Hipo applications, including Tiger and Cobra ?. Please confirm this is correct for your application prior to bidding, I do not accept returns

http://www.ebay.com/itm/Hipo-289-Cobra- ... 7675.l2557

-Fred-


This spacer received no bids by January 11, 2017 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Wed Jan 11, 2017 10:57 pm

C6ZZKGT wrote:
C6ZZKGT wrote:Here is a used HiPo carburetor spacer for sale by eBay member "shanty137" with a starting bid of $94.00 and a Buy-It-Now of $129.00:

You are bidding on 1 used 4v original Ford carburetor spacer with vacuum fitting on the back. This may have come on various early Ford / Mercury applications. The casting engineering number is C3OE-9A589-E , i will list this as application unknown, but from what i was able to find on the internet, this might be correct for early 289 Hipo applications, including Tiger and Cobra ?. Please confirm this is correct for your application prior to bidding, I do not accept returns

http://www.ebay.com/itm/Hipo-289-Cobra- ... 7675.l2557

-Fred-


This spacer received no bids by January 11, 2017 and therefore did NOT sell.

-Fred-


This spacer is back on Ebay again with no changes:

http://www.ebay.com/itm/Hipo-289-Cobra- ... 41?vxp=mtr

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Thu Jan 19, 2017 12:20 pm

C6ZZKGT wrote:
C6ZZKGT wrote:
C6ZZKGT wrote:Here is a used HiPo carburetor spacer for sale by eBay member "shanty137" with a starting bid of $94.00 and a Buy-It-Now of $129.00:

You are bidding on 1 used 4v original Ford carburetor spacer with vacuum fitting on the back. This may have come on various early Ford / Mercury applications. The casting engineering number is C3OE-9A589-E , i will list this as application unknown, but from what i was able to find on the internet, this might be correct for early 289 Hipo applications, including Tiger and Cobra ?. Please confirm this is correct for your application prior to bidding, I do not accept returns

http://www.ebay.com/itm/Hipo-289-Cobra- ... 7675.l2557

-Fred-


This spacer received no bids by January 11, 2017 and therefore did NOT sell.

-Fred-


This spacer is back on Ebay again with no changes:

http://www.ebay.com/itm/Hipo-289-Cobra- ... 41?vxp=mtr

-Fred-


This spacer received no bids by January 18, 2017 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Mon Oct 23, 2017 3:10 am

THIS carb spacer is for sale by eBay member " okeeracer " with a starting bid of $9.99.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Thu Oct 26, 2017 10:53 pm

THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Sun Oct 29, 2017 3:01 am

SixT5HiPo wrote:THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."


Ended with exactly zero bids.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Sun Oct 29, 2017 3:03 am

SixT5HiPo wrote:THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."

Ended with exactly zero bids.


Listed again HERE with NO changes.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Mon Oct 30, 2017 3:02 am

SixT5HiPo wrote:THIS carb spacer is for sale by eBay member " okeeracer " with a starting bid of $9.99.


Ended and NOT sold because the reserve was not met with a high bid of only $10.49.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby SixT5HiPo » Fri Nov 03, 2017 8:33 pm

HERE'S a restored spacer for sale by eBay member " smallbford " for $80.00.

"This item is a ford v8 4bbl aluminum factory oem carburetor spacer plate. This spacer was factory on most 289 and 302 4v engines 1963 - 1968 including mustangs, it was also used on the 1969 mustang gt350 351w and the 1969 cougar 351w."
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6411
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Sun Nov 05, 2017 7:37 am

SixT5HiPo wrote:
SixT5HiPo wrote:THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."

Ended with exactly zero bids.


Listed again HERE with NO changes.


This spacer received no bids by November 4, 2017 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Sun Nov 05, 2017 7:39 am

C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."

Ended with exactly zero bids.


Listed again HERE with NO changes.


This spacer received no bids by November 4, 2017 and therefore did NOT sell.

-Fred-


This spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/1964-1965-1966 ... 23?vxp=mtr

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Sun Nov 12, 2017 8:50 am

C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."

Ended with exactly zero bids.


Listed again HERE with NO changes.


This spacer received no bids by November 4, 2017 and therefore did NOT sell.

-Fred-


This spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/1964-1965-1966 ... 23?vxp=mtr

-Fred-[/quote]

This spacer received no bids by November 11, 2017 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C4OE-A Carburetor Spacer

Postby C6ZZKGT » Sun Nov 12, 2017 8:51 am

C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THIS used carb spacer is for sale by eBay member " magmustangs " with a starting bid of $99.00.

"1964-1969 Ford Mustang, Shelby GT-350, Falcon, Fairlane, Torino, Ranchero, Mercury Cougar, Montego, Comet, Cyclone. ORIGINAL 4V CARBURETOR SPACER For 289-HIPO-302-351W Engine. 1" HEIGHT. .. This is an ORIGINAL FORD PART. Casting Number C4OE-9A589-E and (FoMoCo). Removed from a 68 Mustang 302 4V Motor. This Spacer is in Great Original Condition. It is Clean and Straight. Has a Natural Metal Finish and Looks Great. Smooth Gasket Surfaces. No heavy Build-Up on the inside. Has a Good PCV Port Tube. Not clogged. No Cracks. No rust or corrosion. Overall, this is a Great Original 4V Carburetor Spacer. Please email with questions."

Ended with exactly zero bids.


Listed again HERE with NO changes.


This spacer received no bids by November 4, 2017 and therefore did NOT sell.

-Fred-


This spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/1964-1965-1966 ... 23?vxp=mtr

-Fred-[/quote]

This spacer received no bids by November 11, 2017 and therefore did NOT sell.

-Fred-[/quote]

This spacer is back on Ebay again with no changes:

https://www.ebay.com/itm/1964-1965-1966 ... 50?vxp=mtr

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5956
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Next

Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: No registered users and 1 guest