Used C5OE Heads

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

Re: Used C5OE Heads

Postby C6ZZKGT » Mon May 13, 2013 9:34 am

This set of modified heads is for sale by eBay member "rbirmele".

DESCRIPTION: "I have owned these heads since 1966, and they have been on one of my race cars ever since. They make big power, and never had any problems except some header leaks from the large ports. I just installed new MegaFlow Stainless Valves, new Laniati roller cam springs, and retainers. I just lightly cleaned them up, this is how they came off the car in appearance. Studs have been removed to prep heads for brand new, Pro Comp Shaft Rockers (Shown and Included). Clearanced for 3/8 inch push rods.

They are C5OE 289 Hi Po heads that were ported and polished by Crane in 1966. Just making this head change cut my ET by 1/2 second from 289 Four Barrel heads. I was able to run a much wilder roller cam and intake since the heads breathed so much better. You should be able to Scotch Brite the surfaces, install them, and go racing."

eBay Link


These heads are back on Ebay again with a reduced starting bid of $1.550.00 and a Buy-It-Now of $2,050.00:

http://www.ebay.com/itm/151044395176?ss ... 118wt_1402

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby SixT5HiPo » Tue May 21, 2013 10:06 pm

This set of heads is for sale by eBay member "cerreta2884".

DESCRIPTION: "This is a set of Ford 289 K Code heads. They look like they have been ported, and in very good sharp. The code on the heads is C5OE, also has a date stamp 4L16, and they are matching heads."

eBay Link

ImageImage

ImageImage
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Tue May 21, 2013 10:51 pm

This set of used heads is for sale by eBay member "orlandomustang1966". (Note: the heads should be painted black.)

DESCRIPTION: "Used pair of early 1964 289 K Heads. Six of the valves have FoMoCo logos on them. The other two are replacement (see photos). These heads were recently run, and replaced with aluminum high performance heads. We believe they can be installed without rebuilding, however have an experienced mechanic inspect the heads before installation. Head numbers on outside corners: 18 & 20 (see photos) Date Code: January 1964 (4A14) on both heads."

eBay Link

Image Image

Image Image

Image Image

Image Image

Image Image

Image Image
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Wed May 29, 2013 11:50 pm

SixT5HiPo wrote:This set of heads is for sale by eBay member "cerreta2884".

DESCRIPTION: "This is a set of Ford 289 K Code heads. They look like they have been ported, and in very good sharp. The code on the heads is C5OE, also has a date stamp 4L16, and they are matching heads."

eBay Link



SOLD for $1,025.00.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby C6ZZKGT » Fri May 31, 2013 6:09 pm

This set of used heads is for sale by eBay member "orlandomustang1966". (Note: the heads should be painted black.)

DESCRIPTION: "Used pair of early 1964 289 K Heads. Six of the valves have FoMoCo logos on them. The other two are replacement (see photos). These heads were recently run, and replaced with aluminum high performance heads. We believe they can be installed without rebuilding, however have an experienced mechanic inspect the heads before installation. Head numbers on outside corners: 18 & 20 (see photos) Date Code: January 1964 (4A14) on both heads."

eBay Link


These heads were bid to $1,425.99 but did not meet the sellers reserve and therefore did not sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby SixT5HiPo » Thu Jul 11, 2013 12:03 am

This set of used heads is for sale by eBay member "orlandomustang1966". (Note: the heads should be painted black.)

DESCRIPTION: "Used pair of early 1964 289 K Heads. Six of the valves have FoMoCo logos on them. The other two are replacement (see photos). These heads were recently run, and replaced with aluminum high performance heads. We believe they can be installed without rebuilding, however have an experienced mechanic inspect the heads before installation. Head numbers on outside corners: 18 & 20 (see photos) Date Code: January 1964 (4A14) on both heads."

eBay Link

These heads were bid to $1,425.99 but did not meet the sellers reserve and therefore did not sell.



Relisted HERE
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Sun Jul 14, 2013 10:56 pm

SixT5HiPo wrote:This set of used heads is for sale by eBay member "orlandomustang1966". (Note: the heads should be painted black.)

DESCRIPTION: "Used pair of early 1964 289 K Heads. Six of the valves have FoMoCo logos on them. The other two are replacement (see photos). These heads were recently run, and replaced with aluminum high performance heads. We believe they can be installed without rebuilding, however have an experienced mechanic inspect the heads before installation. Head numbers on outside corners: 18 & 20 (see photos) Date Code: January 1964 (4A14) on both heads."

eBay Link

These heads were bid to $1,425.99 but did not meet the sellers reserve and therefore did not sell.



Relisted HERE


Bid to $1,225.00 when the auction ended. Apparently these heads were not sold...
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Sat Aug 03, 2013 11:59 pm

SixT5HiPo wrote:This set of used heads is for sale by eBay member "orlandomustang1966". (Note: the heads should be painted black.)

DESCRIPTION: "Used pair of early 1964 289 K Heads. Six of the valves have FoMoCo logos on them. The other two are replacement (see photos). These heads were recently run, and replaced with aluminum high performance heads. We believe they can be installed without rebuilding, however have an experienced mechanic inspect the heads before installation. Head numbers on outside corners: 18 & 20 (see photos) Date Code: January 1964 (4A14) on both heads."

eBay Link

These heads were bid to $1,425.99 but did not meet the sellers reserve and therefore did not sell.



Relisted HERE

Bid to $1,225.00 when the auction ended. Apparently these heads were not sold...


Relisted HERE with a fixed price of $2,550.00.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby C6ZZKGT » Wed Apr 23, 2014 10:23 pm

Here are some C5OE heads that sold on Ebay 4-21-2014 by seller murphy088 for $2,225.00:

http://www.ebay.com/itm/ford-289-hipo-h ... 7675.l2557

Ford 289 hipo heads part numbers 5A11...so Jan 11 1965..(19) stamp ,,.4M 16 so Dec 16 1964 (20) stamp . these heads came off same motor.. these 2 heads heads just cam e back from machine shop .the deck had .005 machined off to make then clean and flat...16 new hardened seats just installed..so they will work great for unleaded fuel.they where magnifuxed, .the seats have not been ground yet..i have a nice set of GT 40 valves ..1.84 intake and 1.54 exhaust... also have stock size valves of 1.78 and 1.45...you can use what ever valves you want.. i have rockers a set of springs (15 in picture ,the other one is still at shop) i do not have the screw in studs.. i have some manifolds listed also.. i will ship heads from detroit ..fee is $ 90..thanks for looking

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby C6ZZKGT » Fri May 01, 2015 8:09 am

This pair of heads was sold on Ebay by seller 135barbarae for $1,400.00 on April 27, 2015 with 5 bids from 4 bidders:

http://www.ebay.com/itm/1965-Ford-Musta ... 7675.l2557

For sale 1 1965 Ford Mustang Shelby Cobra cyl. heads.

Product Features:
•Cobra heads looks like they have been ported, and polished, machined at one time.
•No cracks or repairs
•No broken or striped bolt holes
•Does need a complete valve job and guides
•Has a bad exh. valve and retainer due to push rod
•Missing 1 lock down adjusting nut
•I believe aftermarket springs
•Have been sitting on the self for 30 plus years needs to cleaned

Heads will be shipped in 2 boxes due to the weight of items.
We also have other Mustang parts, years 1964-73 and Mustang II parts, years 1974-78.

Please call (609-351-9904) or eBay message me with any questions before bidding.

The item is sold as is.


-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby SixT5HiPo » Sat May 02, 2015 2:40 pm

C6ZZKGT wrote:This pair of heads was sold on Ebay by seller 135barbarae for $1,400.00 on April 27, 2015 with 5 bids from 4 bidders:

http://www.ebay.com/itm/1965-Ford-Musta ... 7675.l2557

For sale 1 1965 Ford Mustang Shelby Cobra cyl. heads.

Product Features:
•Cobra heads looks like they have been ported, and polished, machined at one time.
•No cracks or repairs
•No broken or striped bolt holes
•Does need a complete valve job and guides
•Has a bad exh. valve and retainer due to push rod
•Missing 1 lock down adjusting nut
•I believe aftermarket springs
•Have been sitting on the self for 30 plus years needs to cleaned

Heads will be shipped in 2 boxes due to the weight of items.
We also have other Mustang parts, years 1964-73 and Mustang II parts, years 1974-78.

Please call (609-351-9904) or eBay message me with any questions before bidding.

The item is sold as is.


-Fred-


Very strong money for these. Date codes are not that close for my money...
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby C6ZZKGT » Tue Jun 30, 2015 3:53 pm

Here is a pair of C5OE heads sold June 28, 2015 by Ebay seller mustangmasters428 for $2,700:

http://www.ebay.com/itm/65-66-Shelby-Mu ... 7675.l2557

Here we have a nice pair of Ford 289 High-performance heads recently brought to us from one of our recent buyouts. The 289 Hipo motor was the best Ford had to offer in the earlier model Shelby Mustangs and Fairlaines. The Shelby GT 350 and all K model Mustangs as well as Hipo Fairlanes all used these 271 HP motors. A stronger better design these are a Shelby or Cobra must. Keep watching for our pictures of a intakes, block, distributors, balancers, crank even carb and fan.

All the Hipo characteristics are present as seen in the photos. You can clearly see the recessed valve saddles and of course factory screw in studs. These 289 castings both have a 21 on the top corner and a pronounced 4V on both the top and bottom sides. Pictures clearly show casting number C5OE and date codes which are both 5H20 for those that are in need of this info.

These heads are nice with clean castings which is uncommon in these high revving motors. We see no signs of cracks, welds but these heads have been planned on the gasket side to assure a clean flat surface. These heads were both bought with a true 289 hipo block as we have the short block that has the special rods and main caps. They all have had little use and has been in storage for many years. If interested watch the bottom half will be offered soon or just ask we can put up a auction just for you!!

The footprint (recessed area on bottom of the head to indicate planning or modifications) are recently freshened up for ready to install usability although a builder might want to take a unneeded swipe at them. Got a need and want to bring that Mustang, Shelby, Fairlane, or any other ford product with a 289 to a whole new level of performance and strength with HiPo heads.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby C6ZZKGT » Mon Nov 16, 2015 6:11 pm

Here is a pair of C5OE heads sold November 16, 2015 by Ebay seller michaekazaria_7 for $1,503.50 with 16 bids from 7 bidders:

http://www.ebay.com/itm/1965-Ford-Hi-po ... 7675.l2557

Nice pair of 1965 Ford 289 K-Code Shelby mustang heads. Part number C50E date code 4k30 bottom of head has A 21 other head has date code 4H3 with A 21 on bottom of head also. Heads are in good shape except on one head one of the push rod openings is ovaled out with slight damage to the stud shown in pictures. Heads have no repairs done and all threads in good shape. These heads would work great on your restored mustang muscle car or hot rod. Selling as is with no reserve happy bidding make sure to check out my other listings for rare hard to find speed equipment and parts

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby SixT5HiPo » Fri Jan 15, 2016 3:58 am

This set of used, as is heads was SOLD for $1,500.00 by eBay member "michaekazaria_7".

DESCRIPTION: "1965 Ford Mustang Hi-Po K code heads. C50E part numbers one head has 4L16 other head is 4M16 and Double dot over 289. Pair of great heads has had one repair done to bottom of stud shown in pictures. Also on one head two of the top valve cover bolts are broken off inside the threads. Other than that the heads are really clean. Would be great for your restoration or muscle car. Selling as is with no reserve. Happy bidding."

eBay Link
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Tue Feb 23, 2016 7:35 pm

This set of used heads was SOLD by eBay member " sdford406".

DESCRIPTION: "Matched pair of 1965 289 HiPo heads.Clean bare heads with no visible damage. Blasted and inspected. Original rocker studs included. Matching Dec 9th of 1964 dates."

eBay Link
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Tue Mar 08, 2016 5:53 pm

Here is a single used head for sale by eBay member " michaekazaria_7 " .

DESCRIPTION: "Rare Ford C50E cylinder head. Single head in great shape no repairs or cracks and all threads are good. Date 4J16 and double dot above 289. Came on 1965 mustang k code Hipo cars and Shelby mustangs. Perfect head if your missing one or have a bad head on your restoration project muscle car hot rod or Shelby. Selling as is with no reserve. Happy bidding."

eBay Link
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Tue Mar 08, 2016 6:16 pm

Here is a used pair of heads for sale by eBay member "kell_ada" for only $2,400.00.

DESCRIPTION: "These are the real deal. Ford High Performance cylinder heads for a small block Windsor. The casting code is C50E-A and they are date coded 4L16 and 5A11 respectively. They were stored in a closed garage for quite a few years, and I believe they were refurbished at a machine shop before they were put in storage. These are quite heavy because they are made from cast iron. They do not include valve springs or rockers. What you see is what you get, but these are as original as they come. Buyer pays shipping, you can specify how you want the item shipped. I would expect for something this heavy that shipping will be around $150."

eBay Link
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby C6ZZKGT » Mon Mar 14, 2016 7:17 am

SixT5HiPo wrote:Here is a used pair of heads for sale by eBay member "kell_ada" for only $2,400.00.

DESCRIPTION: "These are the real deal. Ford High Performance cylinder heads for a small block Windsor. The casting code is C50E-A and they are date coded 4L16 and 5A11 respectively. They were stored in a closed garage for quite a few years, and I believe they were refurbished at a machine shop before they were put in storage. These are quite heavy because they are made from cast iron. They do not include valve springs or rockers. What you see is what you get, but these are as original as they come. Buyer pays shipping, you can specify how you want the item shipped. I would expect for something this heavy that shipping will be around $150."

eBay Link


These appear fairly nice but seem slightly over priced for bare heads.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby SixT5HiPo » Tue Mar 15, 2016 7:29 pm

SixT5HiPo wrote:Here is a single used head for sale by eBay member " michaekazaria_7 " .

DESCRIPTION: "Rare Ford C50E cylinder head. Single head in great shape no repairs or cracks and all threads are good. Date 4J16 and double dot above 289. Came on 1965 mustang k code Hipo cars and Shelby mustangs. Perfect head if your missing one or have a bad head on your restoration project muscle car hot rod or Shelby. Selling as is with no reserve. Happy bidding."

eBay Link


SOLD for $690.00 including rust.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Sun Mar 20, 2016 6:00 pm

C6ZZKGT wrote:
SixT5HiPo wrote:Here is a used pair of heads for sale by eBay member "kell_ada" for only $2,400.00.

DESCRIPTION: "These are the real deal. Ford High Performance cylinder heads for a small block Windsor. The casting code is C50E-A and they are date coded 4L16 and 5A11 respectively. They were stored in a closed garage for quite a few years, and I believe they were refurbished at a machine shop before they were put in storage. These are quite heavy because they are made from cast iron. They do not include valve springs or rockers. What you see is what you get, but these are as original as they come. Buyer pays shipping, you can specify how you want the item shipped. I would expect for something this heavy that shipping will be around $150."

eBay Link


These appear fairly nice but seem slightly over priced for bare heads.

-Fred-


That's why they didn't sell...Relisted HERE.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby C6ZZKGT » Wed Mar 23, 2016 7:36 am

SixT5HiPo wrote:
C6ZZKGT wrote:
SixT5HiPo wrote:Here is a used pair of heads for sale by eBay member "kell_ada" for only $2,400.00.

DESCRIPTION: "These are the real deal. Ford High Performance cylinder heads for a small block Windsor. The casting code is C50E-A and they are date coded 4L16 and 5A11 respectively. They were stored in a closed garage for quite a few years, and I believe they were refurbished at a machine shop before they were put in storage. These are quite heavy because they are made from cast iron. They do not include valve springs or rockers. What you see is what you get, but these are as original as they come. Buyer pays shipping, you can specify how you want the item shipped. I would expect for something this heavy that shipping will be around $150."

eBay Link


These appear fairly nice but seem slightly over priced for bare heads.

-Fred-


That's why they didn't sell...Relisted HERE.


Now the price is more than doubled at $5,000 or make offer.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 5958
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used C5OE Heads

Postby SixT5HiPo » Wed Mar 23, 2016 8:32 pm


That's why they didn't sell...Relisted HERE.

Now the price is more than doubled at $5,000 or make offer.

-Fred-


Now that's the way to make a sale.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Thu Apr 07, 2016 6:24 pm

SixT5HiPo wrote:

That's why they didn't sell...Relisted HERE.

Now the price is more than doubled at $5,000 or make offer.

-Fred-


Now that's the way to make a sale.


Guess this seller changed his mind. Now the price is set at $2500.00 Go figure.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Sun Apr 17, 2016 3:44 pm


That's why they didn't sell...Relisted HERE.

Now the price is more than doubled at $5,000 or make offer.

-Fred-

Now that's the way to make a sale.

Guess this seller changed his mind. Now the price is set at $2500.00 Go figure.


Ended again with NO sale...and RELISTED again.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used C5OE Heads

Postby SixT5HiPo » Sun Apr 17, 2016 3:45 pm


That's why they didn't sell...Relisted HERE.

Now the price is more than doubled at $5,000 or make offer.

-Fred-

Now that's the way to make a sale.

Guess this seller changed his mind. Now the price is set at $2500.00 Go figure.


Ended again with NO sale...and RELISTED again.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6418
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

PreviousNext

Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: No registered users and 2 guests