Page 7 of 8

Re: Used C5OE Heads

PostPosted: Thu Oct 26, 2017 11:05 am
by SixT5HiPo
THIS pair of used heads are for sale by eBay member " huroner " with a starting bid of $1,150.00.

" Cylinder heads from a 1965 K code High Performance Engine with 1.88" dia. intake & 1.64" dia. exhaust valves.
Combustion chambers measured at 49 cc.
Date Code is 4L16 of (shown in photo) = head casting date of November 16, 1964.
Valve seats are not hardened because these heads have not been run since leaded pump gasoline was discontinued.
I also should have added that under all the carbon deposits / intake ports' surface corrosion are ported and polished intake & exhaust ports and combustion chamber surfaces."

Re: Used C5OE Heads

PostPosted: Wed Nov 01, 2017 9:21 pm
by SixT5HiPo
SixT5HiPo wrote:THIS pair of used heads are for sale by eBay member " huroner " with a starting bid of $1,150.00.

" Cylinder heads from a 1965 K code High Performance Engine with 1.88" dia. intake & 1.64" dia. exhaust valves.
Combustion chambers measured at 49 cc.
Date Code is 4L16 of (shown in photo) = head casting date of November 16, 1964.
Valve seats are not hardened because these heads have not been run since leaded pump gasoline was discontinued.
I also should have added that under all the carbon deposits / intake ports' surface corrosion are ported and polished intake & exhaust ports and combustion chamber surfaces."


Ended with zero bids.

Re: Used C5OE Heads

PostPosted: Sat Nov 04, 2017 2:36 am
by SixT5HiPo
HERE'S a set of used C5 HiPo heads for sale by eBay member "J427" with a starting bid of $1,699.00, and a Buy it Now price of $2,209.00.

"You are getting the 2 hipo heads pictured. I got them from a friend at a machine shop. He said the heads have been in his personal stash for over 25 years. Both heads have the same date. I see nothing wrong at all with them as far as eyes can see. All I did was clean them. Please look at all the pictures before you bid. Heads will be shipped in 2 seperate boxes."

Re: Used C5OE Heads

PostPosted: Sun Nov 05, 2017 6:41 pm
by SixT5HiPo
SixT5HiPo wrote:HERE'S a set of used C5 HiPo heads for sale by eBay member "J427" with a starting bid of $1,699.00, and a Buy it Now price of $2,209.00.

"You are getting the 2 hipo heads pictured. I got them from a friend at a machine shop. He said the heads have been in his personal stash for over 25 years. Both heads have the same date. I see nothing wrong at all with them as far as eyes can see. All I did was clean them. Please look at all the pictures before you bid. Heads will be shipped in 2 seperate boxes."


SOLD for the asking price of $2,209.00.

Re: Used C5OE Heads

PostPosted: Sun Nov 05, 2017 10:03 pm
by SixT5HiPo
SixT5HiPo wrote:HERE'S a set of used C5 HiPo heads for sale by eBay member "J427" with a starting bid of $1,699.00, and a Buy it Now price of $2,209.00.

"You are getting the 2 hipo heads pictured. I got them from a friend at a machine shop. He said the heads have been in his personal stash for over 25 years. Both heads have the same date. I see nothing wrong at all with them as far as eyes can see. All I did was clean them. Please look at all the pictures before you bid. Heads will be shipped in 2 seperate boxes."

SOLD for the asking price of $2,209.00.


These heads were sold in less than 48 hours. Pretty amazing.

Re: Used C5OE Heads

PostPosted: Fri Nov 10, 2017 10:16 am
by C6ZZKGT
SixT5HiPo wrote:
SixT5HiPo wrote:THIS pair of used heads are for sale by eBay member " huroner " with a starting bid of $1,150.00.

" Cylinder heads from a 1965 K code High Performance Engine with 1.88" dia. intake & 1.64" dia. exhaust valves.
Combustion chambers measured at 49 cc.
Date Code is 4L16 of (shown in photo) = head casting date of November 16, 1964.
Valve seats are not hardened because these heads have not been run since leaded pump gasoline was discontinued.
I also should have added that under all the carbon deposits / intake ports' surface corrosion are ported and polished intake & exhaust ports and combustion chamber surfaces."


Ended with zero bids.


These heads are back on Ebay again with a slightly lower price of $1,100.00:

https://www.ebay.com/itm/1964-1967-Ford ... 7675.l2557

-Fred-

Re: Used C5OE Heads

PostPosted: Fri Nov 10, 2017 10:17 am
by C6ZZKGT
C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THIS pair of used heads are for sale by eBay member " huroner " with a starting bid of $1,150.00.

" Cylinder heads from a 1965 K code High Performance Engine with 1.88" dia. intake & 1.64" dia. exhaust valves.
Combustion chambers measured at 49 cc.
Date Code is 4L16 of (shown in photo) = head casting date of November 16, 1964.
Valve seats are not hardened because these heads have not been run since leaded pump gasoline was discontinued.
I also should have added that under all the carbon deposits / intake ports' surface corrosion are ported and polished intake & exhaust ports and combustion chamber surfaces."


Ended with zero bids.


These heads are back on Ebay again with a slightly lower price of $1,100.00:

https://www.ebay.com/itm/1964-1967-Ford ... 7675.l2557

-Fred-


These heads sold November 9, 2017 on Ebay for $1,100.00.

-Fred-

Re: Used C5OE Heads

PostPosted: Fri Nov 10, 2017 10:18 am
by C6ZZKGT
C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THIS pair of used heads are for sale by eBay member " huroner " with a starting bid of $1,150.00.

" Cylinder heads from a 1965 K code High Performance Engine with 1.88" dia. intake & 1.64" dia. exhaust valves.
Combustion chambers measured at 49 cc.
Date Code is 4L16 of (shown in photo) = head casting date of November 16, 1964.
Valve seats are not hardened because these heads have not been run since leaded pump gasoline was discontinued.
I also should have added that under all the carbon deposits / intake ports' surface corrosion are ported and polished intake & exhaust ports and combustion chamber surfaces."


Ended with zero bids.


These heads are back on Ebay again with a slightly lower price of $1,100.00:

https://www.ebay.com/itm/1964-1967-Ford ... 7675.l2557

-Fred-


These heads sold November 9, 2017 on Ebay for $1,100.00.

-Fred-[/quote]

It is possible that the aggressive porting may have been a deterrent for a lot of people.

-Fred-

Re: Used C5OE Heads

PostPosted: Sat Dec 30, 2017 4:31 am
by SixT5HiPo
HERE'S a single HiPo head for sale by eBay member " gwpford " with a very high starting bid of $999.99.

"Very nice takeoff 1965 Mustang,Shelby GT350 289 HP Cylinder head cast C5OE with 5C3 Date,very hard to locate early head."

Re: Used C5OE Heads

PostPosted: Fri Jan 05, 2018 10:29 pm
by SixT5HiPo
SixT5HiPo wrote:HERE'S a single HiPo head for sale by eBay member " gwpford " with a very high starting bid of $999.99.

"Very nice takeoff 1965 Mustang,Shelby GT350 289 HP Cylinder head cast C5OE with 5C3 Date,very hard to locate early head."


This listing ended with NO bids.

Re: Used C5OE Heads

PostPosted: Sat Jan 06, 2018 7:03 am
by C6ZZKGT
SixT5HiPo wrote:
SixT5HiPo wrote:HERE'S a single HiPo head for sale by eBay member " gwpford " with a very high starting bid of $999.99.

"Very nice takeoff 1965 Mustang,Shelby GT350 289 HP Cylinder head cast C5OE with 5C3 Date,very hard to locate early head."


This listing ended with NO bids.


This head is back on Ebay again with a new lower Buy-It-Now of $833.33:

https://www.ebay.com/itm/1965-MUSTANG-S ... 10?vxp=mtr

-Fred-

Re: Used C5OE Heads

PostPosted: Sat Jan 06, 2018 7:05 am
by C6ZZKGT
C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:HERE'S a single HiPo head for sale by eBay member " gwpford " with a very high starting bid of $999.99.

"Very nice takeoff 1965 Mustang,Shelby GT350 289 HP Cylinder head cast C5OE with 5C3 Date,very hard to locate early head."


This listing ended with NO bids.


This head is back on Ebay again with a new lower Buy-It-Now of $833.33:

https://www.ebay.com/itm/1965-MUSTANG-S ... 10?vxp=mtr

-Fred-


The seller warns that the push rod holes have been opened up. Therefore push rod guide plates will now be needed. The best ones to use are the C9OX ones that Ford serviced during the muscle parts program.

-Fred-

Re: Used C5OE Heads

PostPosted: Mon Jan 15, 2018 3:55 am
by SixT5HiPo
HERE'S a set of used heads painted blue that are for sale by eBay member " mustangmasters428 " with a starting bid of $1995.00, and a shipping charge of $134.16.

"Here we have a matched pair of real deal C5OE Ford 289 High-performance heads brought to us from one of our past buyouts with a K model Coupe we are currently bringing back to life. The 289 Hipo motor was the best Ford had to offer in the earlier model Shelby, Mustang and Fairlanes. The Shelby GT 350 as well as the K model Mustangs & the Hipo Fairlanes all used these 271 horsepower motors which makes them highly desirable . A stronger better design these are a builders must .

All the Hipo characteristics are present as seen in the photos. You can clearly see the recessed valve saddles and of course there drilled for the factory screw in studs. These 289 castings have a 20 on one head and a 21 on the top corner and a pronounced 4V on both the top and bottom sides. Pictures clearly show the casting number of C5OE casting with date codes of 5D27 and a 5D28.

These heads are uncracked original castings which is uncommon in these high revving motors. We have had them magnifluxed and they are guaranteed not to have any hidden damage. These pair of heads have at some time been sealed up on the water ports which added a performance boost. We had them gasket matched to assure the passageways are clear of any obstruction in that area.

You might also notice the ports are polished for a better flow pattern and we left the block side as was so the work was visible. The underside footprint (recessed area on bottom of the head to indicate planing or modifications) are clearly visible so a freshly cut away will be needed for ready to install usability. Got a need and want to bring that Mustang, Shelby, Fairlane, or any other ford product with a 289 to a whole new level of originality, performance and strength with HiPo heads."

Re: Used C5OE Heads

PostPosted: Mon Jan 22, 2018 4:17 am
by SixT5HiPo
SixT5HiPo wrote:HERE'S a set of used heads painted blue that are for sale by eBay member " mustangmasters428 " with a starting bid of $1995.00, and a shipping charge of $134.16.

"Here we have a matched pair of real deal C5OE Ford 289 High-performance heads brought to us from one of our past buyouts with a K model Coupe we are currently bringing back to life.

These heads are uncracked original castings which is uncommon in these high revving motors. We have had them magnifluxed and they are guaranteed not to have any hidden damage. These pair of heads have at some time been sealed up on the water ports which added a performance boost. We had them gasket matched to assure the passageways are clear of any obstruction in that area.

You might also notice the ports are polished for a better flow pattern and we left the block side as was so the work was visible. The underside footprint (recessed area on bottom of the head to indicate planing or modifications) are clearly visible so a freshly cut away will be needed for ready to install usability. Got a need and want to bring that Mustang, Shelby, Fairlane, or any other ford product with a 289 to a whole new level of originality, performance and strength with HiPo heads."


Bidding has ended on this item.

Re: Used C5OE Heads

PostPosted: Sun Feb 11, 2018 4:47 am
by SixT5HiPo
THIS listing is for an expensive pair of used heads for sale by eBay member "shelbykirk" with a starting bid of $2.200.00 and a Buy it Now price of $3,500.00.

"These are an all original set of Hipo heads. They have NEVER had any modifications, repairs, or welding done. They do not have any cracks.

These are the real deal hipo heads. These are identical out of the same mold. Both have the 21 stamped on the corner.

Both are 6B25 stamped for the date code.

Both are completely original and a beautiful set to build your true HIPO engine."

Re: Used C5OE Heads

PostPosted: Mon Feb 12, 2018 4:25 am
by SixT5HiPo
SixT5HiPo wrote:HERE'S a set of used heads painted blue that are for sale by eBay member " mustangmasters428 " with a starting bid of $1995.00, and a shipping charge of $134.16.

"Here we have a matched pair of real deal C5OE Ford 289 High-performance heads brought to us from one of our past buyouts with a K model Coupe we are currently bringing back to life.

These heads are uncracked original castings which is uncommon in these high revving motors. We have had them magnifluxed and they are guaranteed not to have any hidden damage. These pair of heads have at some time been sealed up on the water ports which added a performance boost. We had them gasket matched to assure the passageways are clear of any obstruction in that area.

You might also notice the ports are polished for a better flow pattern and we left the block side as was so the work was visible. The underside footprint (recessed area on bottom of the head to indicate planing or modifications) are clearly visible so a freshly cut away will be needed for ready to install usability. Got a need and want to bring that Mustang, Shelby, Fairlane, or any other ford product with a 289 to a whole new level of originality, performance and strength with HiPo heads."

Bidding has ended on this item.


Relisted HERE with a lower starting bid of $1595.00.

Re: Used C5OE Heads

PostPosted: Tue Feb 13, 2018 10:35 am
by C6ZZKGT
SixT5HiPo wrote:THIS listing is for an expensive pair of used heads for sale by eBay member "shelbykirk" with a starting bid of $2.200.00 and a Buy it Now price of $3,500.00.

"These are an all original set of Hipo heads. They have NEVER had any modifications, repairs, or welding done. They do not have any cracks.

These are the real deal hipo heads. These are identical out of the same mold. Both have the 21 stamped on the corner.

Both are 6B25 stamped for the date code.

Both are completely original and a beautiful set to build your true HIPO engine."


These heads sold February 13, 2018 on Ebay for $3,500.00.

-Fred-

Re: Used C5OE Heads

PostPosted: Tue Feb 13, 2018 5:26 pm
by SixT5HiPo
C6ZZKGT wrote:
SixT5HiPo wrote:THIS listing is for an expensive pair of used heads for sale by eBay member "shelbykirk" with a starting bid of $2.200.00 and a Buy it Now price of $3,500.00.



These heads sold February 13, 2018 on Ebay for $3,500.00.

-Fred-


WoW!

Re: Used C5OE Heads

PostPosted: Thu Feb 15, 2018 4:04 am
by SixT5HiPo
HERE'S a single head dated "4K30" for sale by eBay member " makoracingco " for $350.00.

Re: Used C5OE Heads

PostPosted: Fri Feb 16, 2018 12:23 am
by C6ZZKGT
SixT5HiPo wrote:HERE'S a single head dated "4K30" for sale by eBay member " makoracingco " for $350.00.


The deck surface looks pretty rough and it has been already surfaced beyond the thumbprints. It is a good price if it is salvageable. It has been ported but does not look excessive.

-Fred-

Re: Used C5OE Heads

PostPosted: Mon Feb 19, 2018 4:21 am
by SixT5HiPo
SixT5HiPo wrote:HERE'S a single head dated "4K30" for sale by eBay member " makoracingco " for $350.00.


SOLD for $350.00. Well bought!

Re: Used C5OE Heads

PostPosted: Mon Feb 19, 2018 4:23 am
by SixT5HiPo
SixT5HiPo wrote:
SixT5HiPo wrote:HERE'S a set of used heads painted blue that are for sale by eBay member " mustangmasters428 " with a starting bid of $1995.00, and a shipping charge of $134.16.

"Here we have a matched pair of real deal C5OE Ford 289 High-performance heads brought to us from one of our past buyouts with a K model Coupe we are currently bringing back to life.

These heads are uncracked original castings which is uncommon in these high revving motors. We have had them magnifluxed and they are guaranteed not to have any hidden damage. These pair of heads have at some time been sealed up on the water ports which added a performance boost. We had them gasket matched to assure the passageways are clear of any obstruction in that area.

You might also notice the ports are polished for a better flow pattern and we left the block side as was so the work was visible. The underside footprint (recessed area on bottom of the head to indicate planing or modifications) are clearly visible so a freshly cut away will be needed for ready to install usability. Got a need and want to bring that Mustang, Shelby, Fairlane, or any other ford product with a 289 to a whole new level of originality, performance and strength with HiPo heads."

Bidding has ended on this item.

Relisted HERE with a lower starting bid of $1595.00.


Ended with zero bids.

Re: Used C5OE Heads

PostPosted: Sat Mar 17, 2018 3:50 am
by SixT5HiPo
THIS pair of C5 heads is for sale by eBay member " 502-ac " for $2000.00, or make an offer.

"2 FORD 289 HIPO HEADS THEY APPEAR TO BE REBUILT, BUT WAREHOUSED FOR YEARS. Please look at the pictures AND date codes. Feel free to ask questions or additional photos.

I will build a wooden crate for shipping and will try to get best deal I can on shipping once purchased."

Re: Used C5OE Heads

PostPosted: Mon Mar 26, 2018 10:40 am
by C6ZZKGT
SixT5HiPo wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:HERE'S a set of used heads painted blue that are for sale by eBay member " mustangmasters428 " with a starting bid of $1995.00, and a shipping charge of $134.16.

"Here we have a matched pair of real deal C5OE Ford 289 High-performance heads brought to us from one of our past buyouts with a K model Coupe we are currently bringing back to life.

These heads are uncracked original castings which is uncommon in these high revving motors. We have had them magnifluxed and they are guaranteed not to have any hidden damage. These pair of heads have at some time been sealed up on the water ports which added a performance boost. We had them gasket matched to assure the passageways are clear of any obstruction in that area.

You might also notice the ports are polished for a better flow pattern and we left the block side as was so the work was visible. The underside footprint (recessed area on bottom of the head to indicate planing or modifications) are clearly visible so a freshly cut away will be needed for ready to install usability. Got a need and want to bring that Mustang, Shelby, Fairlane, or any other ford product with a 289 to a whole new level of originality, performance and strength with HiPo heads."

Bidding has ended on this item.

Relisted HERE with a lower starting bid of $1595.00.


Ended with zero bids.


These used heads are back on Ebay again with no changes:

https://www.ebay.com/itm/263569873436?V ... 3569873436

-Fred-

Re: Used C5OE Heads

PostPosted: Mon Mar 26, 2018 8:49 pm
by SixT5HiPo
SixT5HiPo wrote:THIS pair of C5 heads is for sale by eBay member " 502-ac " for $2000.00, or make an offer.

"2 FORD 289 HIPO HEADS THEY APPEAR TO BE REBUILT, BUT WAREHOUSED FOR YEARS. Please look at the pictures AND date codes. Feel free to ask questions or additional photos.

I will build a wooden crate for shipping and will try to get best deal I can on shipping once purchased."


SOLD for exactly $2000.00.