Used Factory HiPo Exhaust Manifolds

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Sat Jun 02, 2018 8:13 pm

C6ZZKGT wrote:
C6ZZKGT wrote:These manifolds are for sale by eBay member "kidredline" with a starting bid of $199.00:

You are looking at a pair of used Ford exhaust manifolds. The left drivers side is the part number C30E9431B cast into it. There is an " N" cast under the part number. There is also a "CAS" cast into the side of the manifold that faces the engine. The passenger right side has the part number C4ZE9430A cast into it. There is the letter "N" cast under the part number. There is also a "CAS" cast into the side of the manifold that faces the engine. Both exhaust manifolds are used but appear to be in excellent condition. I am unsure if these are OEM, FOMOCO, reproductions or aftermarket. They may be correct for your 1963, 1964, 1965, 1966, 1967, 1968, Ford, Mustang, 2+2, GT, GTA, Shelby, 350, 350H, K Code, Falcon, Ranchero, Fairlane, Torino, Mercury, Cougar, XR7, XR-7, Montego, Comet, Caliente, 289, 260, 221, Freeflow, Econoline, F-100, Bronco or any other vintage small block powered car or truck. These manifolds are being sold as is with no warranty or returns. Buyer pays $50.00 shipping and handling.

https://www.ebay.com/itm/1963-1966-Ford ... 0011.m1850

-Fred-


I posted these on here so that people will know what repro manifolds look like as these are repros from CAS. These are miserable manifolds to work with as the castings are thicker than needed and there is no way to get at most of the spark plugs with a socket without a lot of grinding on the manifolds for clearance. Another issue is that the ports appear taller than originals, which at first seems like it would be OK, but in fact the port opening is taller that the casting on the heads. This creates an exhaust leak that makes it impossible to seal without using header gaskets. The only reason that I know this is because I was restoring a 66 Hipo fastback for a customer and he had supplied these manifolds. The time spent trying to make them work would have bought a good set of used original manifolds.

-Fred-


These used reproduction manifolds sold June 2, 2018 on Ebay for $207.50 with 3 bids from 2 bidders.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby SixT5HiPo » Tue Jun 05, 2018 9:13 pm

SixT5HiPo wrote:THESE manifolds are for sale by eBay member " gt289gt390gt500 " for a fixed price of $535.00.

"Used original 289 hi-po exhaust manifolds with casting part numbers. One has date of C 29 5. The other side does not have a legible date code for some reason.

Please look at all the pictures "

These used exhaust manifolds received no bids by May 12, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $435.00:

https://www.ebay.com/itm/292565568083?V ... 2565568083

This listing has ended with NO sale.

These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $450.00:

https://www.ebay.com/itm/292572928718?V ... 2572928718

These used exhaust manifolds received no bids by May 28, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $390.00:

https://www.ebay.com/itm/292585572176?V ... 2585572176

-Fred-


This listing ended with NO sale.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used Factory HiPo Exhaust Manifolds

Postby SixT5HiPo » Fri Jun 08, 2018 3:12 am

THIS used pair of manifolds is for sale by zero feedback eBay member " daben_8074 " for $530.00, or make an offer.

"Very minor pitting on small portion could easily be ground away."
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Sat Jun 09, 2018 9:55 pm

SixT5HiPo wrote:
SixT5HiPo wrote:THESE manifolds are for sale by eBay member " gt289gt390gt500 " for a fixed price of $535.00.

"Used original 289 hi-po exhaust manifolds with casting part numbers. One has date of C 29 5. The other side does not have a legible date code for some reason.

Please look at all the pictures "

These used exhaust manifolds received no bids by May 12, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $435.00:

https://www.ebay.com/itm/292565568083?V ... 2565568083

This listing has ended with NO sale.

These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $450.00:

https://www.ebay.com/itm/292572928718?V ... 2572928718

These used exhaust manifolds received no bids by May 28, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $390.00:

https://www.ebay.com/itm/292585572176?V ... 2585572176

-Fred-


This listing ended with NO sale.


These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $395.00:

https://www.ebay.com/itm/292598215507?V ... 2598215507

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Mon Jun 11, 2018 11:06 am

SixT5HiPo wrote:
SixT5HiPo wrote:THIS nice looking pair of used early HiPo manifolds is for sale by eBay member " collector1138 " for $675.00, or make an offer.

"Pair of 63 - 1966 or 1967 Hi performance exhaust manifolds. C30e-9430-C and C3OE-9131-B. NA84 and B95N2. Good condition. Driver side is same as Mustang Shelby, bur passenger side has choke stoke fitting for fairlanes.Unique to 289 Hi Perf only."

The price is now down to $650.00.

Another price drop to $600.00 even.

New price is now $575.00


Yet another price drop to $565.00.


This listing was ended by the seller June 10, 2018 with the following statement "This listing was ended by the seller because the item is no longer available".

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Mon Jun 11, 2018 12:55 pm

These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Mon Jun 11, 2018 3:06 pm

C6ZZKGT wrote:These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-


I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby SixT5HiPo » Tue Jun 12, 2018 3:51 am

C6ZZKGT wrote:I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


Saw them listed and didn't post them here because they are repops. Maybe someone should contact the seller to inform them that these are NOT originals.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Tue Jun 12, 2018 10:05 am

SixT5HiPo wrote:
C6ZZKGT wrote:I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


Saw them listed and didn't post them here because they are repops. Maybe someone should contact the seller to inform them that these are NOT originals.


I already did contact the seller with no response. Again, I only posted these as a warning to our fellow K code followers.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jun 13, 2018 5:52 am

C6ZZKGT wrote:
C6ZZKGT wrote:These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-


I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


These REPRODUCTION manifolds received no bids by June 12, 2018 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jun 13, 2018 6:00 am

C6ZZKGT wrote:
C6ZZKGT wrote:
C6ZZKGT wrote:These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-


I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


These REPRODUCTION manifolds received no bids by June 12, 2018 and therefore did NOT sell.

-Fred-


These REPRODUCTION manifolds are back on Ebay again and the OEM statement has been eliminated. I guess that the seller did make note of my message to them regarding the fact that these are reproductions. The seller is still not listing them as reproductions but carefully chosen words that would lead a person to believe that they are Ford parts as they still use FoMoCo in the auction title:

https://www.ebay.com/itm/232803993804?V ... 2803993804

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby SixT5HiPo » Fri Jun 15, 2018 10:59 am

C6ZZKGT wrote:
These REPRODUCTION manifolds are back on Ebay again and the OEM statement has been eliminated. I guess that the seller did make note of my message to them regarding the fact that these are reproductions. The seller is still not listing them as reproductions but carefully chosen words that would lead a person to believe that they are Ford parts as they still use FoMoCo in the auction title:

https://www.ebay.com/itm/232803993804?V ... 2803993804

-Fred-


Gotta love eBay. :roll:
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Tue Jun 19, 2018 6:31 pm

C6ZZKGT wrote:
C6ZZKGT wrote:
C6ZZKGT wrote:These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-


I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


These REPRODUCTION manifolds received no bids by June 12, 2018 and therefore did NOT sell.

-Fred-


These REPRODUCTION manifolds are back on Ebay again and the OEM statement has been eliminated. I guess that the seller did make note of my message to them regarding the fact that these are reproductions. The seller is still not listing them as reproductions but carefully chosen words that would lead a person to believe that they are Ford parts as they still use FoMoCo in the auction title:

https://www.ebay.com/itm/232803993804?V ... 2803993804

-Fred-[/quote]

These REPRODUCTION manifolds received no bids by June 19, 2018 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Tue Jun 19, 2018 6:32 pm

C6ZZKGT wrote:
C6ZZKGT wrote:
C6ZZKGT wrote:These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-


I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


These REPRODUCTION manifolds received no bids by June 12, 2018 and therefore did NOT sell.

-Fred-


These REPRODUCTION manifolds are back on Ebay again and the OEM statement has been eliminated. I guess that the seller did make note of my message to them regarding the fact that these are reproductions. The seller is still not listing them as reproductions but carefully chosen words that would lead a person to believe that they are Ford parts as they still use FoMoCo in the auction title:

https://www.ebay.com/itm/232803993804?V ... 2803993804

-Fred-[/quote]

These REPRODUCTION manifolds received no bids by June 19, 2018 and therefore did NOT sell.

-Fred-[/quote]

These reproduction manifolds are back on Ebay again with a much lower starting bid of $24.00:

https://www.ebay.com/itm/232812361100?V ... 2812361100

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Tue Jun 19, 2018 7:08 pm

C6ZZKGT wrote:These manifolds are for sale by eBay member "valhallastudio" with a Buy-It-Now of $750.00 or best offer:

Driver's side is casting date is 6/11/1965, passenger is 8/23/1965, both are marked G2 below part number and come with Factory exhaust pipe studs and nuts. I used David Kees part number identification guide but please double check to make sure this is what you need.

https://www.ebay.com/itm/1964-66-289-HI ... 0#viTabs_0

-Fred-


These manifolds received no bids by June 19, 2018 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jun 27, 2018 6:28 am

C6ZZKGT wrote:
C6ZZKGT wrote:
C6ZZKGT wrote:These REPRODUCTION manifolds are for sale by eBay member "posi-snapper" with a starting bid of $299.99:


Available for auction is this pair of OEM Ford factory high performance exhaust manifolds. These were used on Ford's high performance 289 271 HP K Code used in Falcon Sprint applications from 1963 to 1966 and 289 271 HP K Code and 306 HP Mustang/Shelby GT 350 applications from 1964 to 1966. These had larger passages than the standard manifolds to help the high horse versions breath better and make more power. These pipes were rare back in the day and are even rarer today as many were trashed and forever lost in favor of headers. This is an unmolested set that has not been damaged or modified and are in EXCELLANT USED CONDITION as described under CONDITION. The part numbers are C30Z-9430-R and C5ZZ-9431-B. These pipes would be great for restoring a Shelby or K Code back to its original condition! Any questions? Contact me and I will gladly assist you. Shipping via UPS Ground in the lower Continental USA. International shipping via Ebay Global Shipping Service and UPS. No additional surcharge for packaging and handling. Feel free to check my other listings and thanks for looking!

https://www.ebay.com/itm/OEM-FoMoCo-63- ... 0#viTabs_0

-Fred-


I only put this one on here because the seller is claiming these to be OEM factory manifolds. I wanted to make sure that those of us on the forum are aware that these are actually one of the earlier reproductions that were made. I have seen at least 4 different reproduction versions over the years.

-Fred-


These REPRODUCTION manifolds received no bids by June 12, 2018 and therefore did NOT sell.

-Fred-


These REPRODUCTION manifolds are back on Ebay again and the OEM statement has been eliminated. I guess that the seller did make note of my message to them regarding the fact that these are reproductions. The seller is still not listing them as reproductions but carefully chosen words that would lead a person to believe that they are Ford parts as they still use FoMoCo in the auction title:

https://www.ebay.com/itm/232803993804?V ... 2803993804

-Fred-[/quote]

These REPRODUCTION manifolds received no bids by June 19, 2018 and therefore did NOT sell.

-Fred-[/quote]

These reproduction manifolds are back on Ebay again with a much lower starting bid of $24.00:

https://www.ebay.com/itm/232812361100?V ... 2812361100

-Fred-[/quote]

These REPRODUCTION manifolds sold June 26, 2018 on Ebay for $152.50 with 11 bids from 8 bidders.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Thu Jun 28, 2018 10:57 pm

C6ZZKGT wrote:
C6ZZKGT wrote:These manifolds are for sale by eBay member "valhallastudio" with a Buy-It-Now of $750.00 or best offer:

Driver's side is casting date is 6/11/1965, passenger is 8/23/1965, both are marked G2 below part number and come with Factory exhaust pipe studs and nuts. I used David Kees part number identification guide but please double check to make sure this is what you need.

https://www.ebay.com/itm/1964-66-289-HI ... 0#viTabs_0

-Fred-


These manifolds received no bids by June 19, 2018 and therefore did NOT sell.

-Fred-


These manifolds are back on Ebay again with no changes:

https://www.ebay.com/itm/232823790302?s ... :MEWAX:VRI

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jul 11, 2018 7:44 am

SixT5HiPo wrote:THIS used pair of manifolds is for sale by zero feedback eBay member " daben_8074 " for $530.00, or make an offer.

"Very minor pitting on small portion could easily be ground away."


These used exhaust manifolds received no bids by July 7, 2018 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jul 11, 2018 7:45 am

C6ZZKGT wrote:
SixT5HiPo wrote:THIS used pair of manifolds is for sale by zero feedback eBay member " daben_8074 " for $530.00, or make an offer.

"Very minor pitting on small portion could easily be ground away."


These used exhaust manifolds received no bids by July 7, 2018 and therefore did NOT sell.

-Fred-


These manifolds are back on Ebay again with a lower Buy-It-Now of $500.00 or make offer:

https://www.ebay.com/itm/323336692297?V ... 3336692297

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jul 11, 2018 8:33 am

C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THESE manifolds are for sale by eBay member " gt289gt390gt500 " for a fixed price of $535.00.

"Used original 289 hi-po exhaust manifolds with casting part numbers. One has date of C 29 5. The other side does not have a legible date code for some reason.

Please look at all the pictures "

These used exhaust manifolds received no bids by May 12, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $435.00:

https://www.ebay.com/itm/292565568083?V ... 2565568083

This listing has ended with NO sale.

These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $450.00:

https://www.ebay.com/itm/292572928718?V ... 2572928718

These used exhaust manifolds received no bids by May 28, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $390.00:

https://www.ebay.com/itm/292585572176?V ... 2585572176

-Fred-


This listing ended with NO sale.


These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $395.00:

https://www.ebay.com/itm/292598215507?V ... 2598215507

-Fred-


These used exhaust manifolds received no bids by July 9, 2018 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Wed Jul 11, 2018 9:20 pm

C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THESE manifolds are for sale by eBay member " gt289gt390gt500 " for a fixed price of $535.00.

"Used original 289 hi-po exhaust manifolds with casting part numbers. One has date of C 29 5. The other side does not have a legible date code for some reason.

Please look at all the pictures "

These used exhaust manifolds received no bids by May 12, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $435.00:

https://www.ebay.com/itm/292565568083?V ... 2565568083

This listing has ended with NO sale.

These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $450.00:

https://www.ebay.com/itm/292572928718?V ... 2572928718

These used exhaust manifolds received no bids by May 28, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $390.00:

https://www.ebay.com/itm/292585572176?V ... 2585572176

-Fred-


This listing ended with NO sale.


These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $395.00:

https://www.ebay.com/itm/292598215507?V ... 2598215507

-Fred-


These used exhaust manifolds received no bids by July 9, 2018 and therefore did NOT sell.

-Fred-[/quote]

These manifolds are back on Ebay again with no changes:

https://www.ebay.com/itm/292637700100?V ... 2637700100

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Thu Jul 12, 2018 7:38 am

C6ZZKGT wrote:
SixT5HiPo wrote:
SixT5HiPo wrote:THESE manifolds are for sale by eBay member " gt289gt390gt500 " for a fixed price of $535.00.

"Used original 289 hi-po exhaust manifolds with casting part numbers. One has date of C 29 5. The other side does not have a legible date code for some reason.

Please look at all the pictures "

These used exhaust manifolds received no bids by May 12, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $435.00:

https://www.ebay.com/itm/292565568083?V ... 2565568083

This listing has ended with NO sale.

These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $450.00:

https://www.ebay.com/itm/292572928718?V ... 2572928718

These used exhaust manifolds received no bids by May 28, 2018 and therefore did NOT sell.

These used exhaust manifolds are back on Ebay again with a new lower starting bid of $390.00:

https://www.ebay.com/itm/292585572176?V ... 2585572176

-Fred-


This listing ended with NO sale.


These used exhaust manifolds are back on Ebay again with a new higher Buy-It-Now of $395.00:

https://www.ebay.com/itm/292598215507?V ... 2598215507

-Fred-


These used exhaust manifolds received no bids by July 9, 2018 and therefore did NOT sell.

-Fred-[/quote]

These manifolds are back on Ebay again with no changes:

https://www.ebay.com/itm/292637700100?V ... 2637700100

-Fred-[/quote]

These used manifolds sold July 11, 2018 on Ebay for $395.00.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: Used Factory HiPo Exhaust Manifolds

Postby C6ZZKGT » Thu Jul 12, 2018 7:40 am

C6ZZKGT wrote:
C6ZZKGT wrote:
C6ZZKGT wrote:These manifolds are for sale by eBay member "valhallastudio" with a Buy-It-Now of $750.00 or best offer:

Driver's side is casting date is 6/11/1965, passenger is 8/23/1965, both are marked G2 below part number and come with Factory exhaust pipe studs and nuts. I used David Kees part number identification guide but please double check to make sure this is what you need.

https://www.ebay.com/itm/1964-66-289-HI ... 0#viTabs_0

-Fred-


These manifolds received no bids by June 19, 2018 and therefore did NOT sell.

-Fred-


These manifolds are back on Ebay again with no changes:

https://www.ebay.com/itm/232823790302?s ... :MEWAX:VRI

-Fred-


These manifolds sold July 12, 2018 on Ebay for $750.00.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 7757
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Previous

Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: Google [Bot] and 2 guests

cron