NOS C4OE 6015 F 5 Bolt Block

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

NOS C4OE 6015 F 5 Bolt Block

Postby SixT5HiPo » Wed Jan 03, 2018 4:29 am

HERE'S an NOS 5 bolt 289 block for sale by eBay member "fordautolite" for $2,250.00.

Note: This is a unique item that is not presented as a HiPo block in that the main bearing caps are standard sized, but could be made into an early 5 bolt by using HiPo main caps.

"Here we have about the last NOS 289 block left on the planet. Yep, that's right an NOS 289 block, never been run or used, just stored for over 50 years. Until recently used blocks worked ok, but these days 50 years of corrosion have weakened & thinned the original blocks to the point where the cylinders crack or shatter with as little as .030" overbore, you can just about forget .040" or more, unless you don't mind sleeve(s). So here you go, an NOS never run or had water in it 289 block. The only down side was it was stored poorly, necessitating a clean up bore to just under .020" leaving you to finish for .020" or more over bore. Check the pics you will see ZERO corrosion in water jackets, this block could easily go to .040" or possibly .060" if need be. The original cam bearings perfectly preserved the cam journals, the lifter bores are fine as are the main bearing journals & all machined mating surfaces. This is a 5 bolt bell housing block, numbers correct for your 1964 & early 1965 Mustang, Comet, Fairlane, Cyclone, Falcon, Meteor & Galaxie. This block does have the correct engineering number for a 289K HIPO, if you have a worn out or broken 289K block you could transfer your HIPO caps to this block & after an align bore you would have a correct 289K block correct for your Tiger, Cobra, Mustang, Fairlane, Comet & Cyclone. For you purists please note I have also included a complete set of 6 ASSEMBLY line original freeze plugs with the MP inside of a diamond logo."
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: NOS C4OE 6015 F 5 Bolt Block

Postby C6ZZKGT » Wed Jan 03, 2018 7:53 am

SixT5HiPo wrote:HERE'S an NOS 5 bolt 289 block for sale by eBay member "fordautolite" for $2,250.00.

Note: This is a unique item that is not presented as a HiPo block in that the main bearing caps are standard sized, but could be made into an early 5 bolt by using HiPo main caps.

"Here we have about the last NOS 289 block left on the planet. Yep, that's right an NOS 289 block, never been run or used, just stored for over 50 years. Until recently used blocks worked ok, but these days 50 years of corrosion have weakened & thinned the original blocks to the point where the cylinders crack or shatter with as little as .030" overbore, you can just about forget .040" or more, unless you don't mind sleeve(s). So here you go, an NOS never run or had water in it 289 block. The only down side was it was stored poorly, necessitating a clean up bore to just under .020" leaving you to finish for .020" or more over bore. Check the pics you will see ZERO corrosion in water jackets, this block could easily go to .040" or possibly .060" if need be. The original cam bearings perfectly preserved the cam journals, the lifter bores are fine as are the main bearing journals & all machined mating surfaces. This is a 5 bolt bell housing block, numbers correct for your 1964 & early 1965 Mustang, Comet, Fairlane, Cyclone, Falcon, Meteor & Galaxie. This block does have the correct engineering number for a 289K HIPO, if you have a worn out or broken 289K block you could transfer your HIPO caps to this block & after an align bore you would have a correct 289K block correct for your Tiger, Cobra, Mustang, Fairlane, Comet & Cyclone. For you purists please note I have also included a complete set of 6 ASSEMBLY line original freeze plugs with the MP inside of a diamond logo."


Another down side to this block is that the date code (5D28) is way late for any car that would have been produced as a 5 bolt.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 6203
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: NOS C4OE 6015 F 5 Bolt Block

Postby C6ZZKGT » Mon Jan 08, 2018 11:39 am

C6ZZKGT wrote:
SixT5HiPo wrote:HERE'S an NOS 5 bolt 289 block for sale by eBay member "fordautolite" for $2,250.00.

Note: This is a unique item that is not presented as a HiPo block in that the main bearing caps are standard sized, but could be made into an early 5 bolt by using HiPo main caps.

"Here we have about the last NOS 289 block left on the planet. Yep, that's right an NOS 289 block, never been run or used, just stored for over 50 years. Until recently used blocks worked ok, but these days 50 years of corrosion have weakened & thinned the original blocks to the point where the cylinders crack or shatter with as little as .030" overbore, you can just about forget .040" or more, unless you don't mind sleeve(s). So here you go, an NOS never run or had water in it 289 block. The only down side was it was stored poorly, necessitating a clean up bore to just under .020" leaving you to finish for .020" or more over bore. Check the pics you will see ZERO corrosion in water jackets, this block could easily go to .040" or possibly .060" if need be. The original cam bearings perfectly preserved the cam journals, the lifter bores are fine as are the main bearing journals & all machined mating surfaces. This is a 5 bolt bell housing block, numbers correct for your 1964 & early 1965 Mustang, Comet, Fairlane, Cyclone, Falcon, Meteor & Galaxie. This block does have the correct engineering number for a 289K HIPO, if you have a worn out or broken 289K block you could transfer your HIPO caps to this block & after an align bore you would have a correct 289K block correct for your Tiger, Cobra, Mustang, Fairlane, Comet & Cyclone. For you purists please note I have also included a complete set of 6 ASSEMBLY line original freeze plugs with the MP inside of a diamond logo."


Another down side to this block is that the date code (5D28) is way late for any car that would have been produced as a 5 bolt.

-Fred-


This NOS block received no bids by January 8, 2018 and therefore did NOT sell.

-Fred-
66 K GT Fastback Silver Frost / Black Pony Interior
66 K GT Fastback Signal Flare Red / Black Pony Interior
65 K Coupe Phoenician Yellow / Black Standard Interior
65 A Code 4 speed Ranchero
64 289 4 Speed Falcon Sedan Delivery
66 Corvette 427 Roadster
User avatar
C6ZZKGT
Klassic
 
Posts: 6203
Joined: Fri Nov 25, 2011 10:35 am
Location: Canyon Country, California

Re: NOS C4OE 6015 F 5 Bolt Block

Postby SixT5HiPo » Thu Jan 11, 2018 5:43 pm

SixT5HiPo wrote:HERE'S an NOS 5 bolt 289 block for sale by eBay member "fordautolite" for $2,250.00.

Note: This is a unique item that is not presented as a HiPo block in that the main bearing caps are standard sized, but could be made into an early 5 bolt by using HiPo main caps.

"Here we have about the last NOS 289 block left on the planet. Yep, that's right an NOS 289 block, never been run or used, just stored for over 50 years. Until recently used blocks worked ok, but these days 50 years of corrosion have weakened & thinned the original blocks to the point where the cylinders crack or shatter with as little as .030" overbore, you can just about forget .040" or more, unless you don't mind sleeve(s). So here you go, an NOS never run or had water in it 289 block. The only down side was it was stored poorly, necessitating a clean up bore to just under .020" leaving you to finish for .020" or more over bore. Check the pics you will see ZERO corrosion in water jackets, this block could easily go to .040" or possibly .060" if need be. The original cam bearings perfectly preserved the cam journals, the lifter bores are fine as are the main bearing journals & all machined mating surfaces. This is a 5 bolt bell housing block, numbers correct for your 1964 & early 1965 Mustang, Comet, Fairlane, Cyclone, Falcon, Meteor & Galaxie. This block does have the correct engineering number for a 289K HIPO, if you have a worn out or broken 289K block you could transfer your HIPO caps to this block & after an align bore you would have a correct 289K block correct for your Tiger, Cobra, Mustang, Fairlane, Comet & Cyclone. For you purists please note I have also included a complete set of 6 ASSEMBLY line original freeze plugs with the MP inside of a diamond logo."

Another down side to this block is that the date code (5D28) is way late for any car that would have been produced as a 5 bolt.

-Fred-

This NOS block received no bids by January 8, 2018 and therefore did NOT sell.

-Fred-


Still available for sale with NO changes HERE.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 6707
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA


Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: No registered users and 1 guest