EDELBROCK X-F8 XF8 Intake Manifold

Post links and desKriptions of 289 HiPo/K-Kode specifiK parts you see on ebay or other Kar sites. This seKtion used to help determine the Kurrent value of items.

EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Mon Feb 19, 2018 4:58 am

THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Tue Mar 13, 2018 3:02 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!



This listing has ended.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Tue Mar 13, 2018 3:03 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.


Relisted with NO changes HERE.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Thu Apr 12, 2018 3:48 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.

Relisted with NO changes HERE.


Ended with NO sale.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Wed Apr 18, 2018 3:44 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.

Relisted with NO changes HERE.

Ended with NO sale.


Relisted HERE for a lower price of $1,049.00.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Sun May 13, 2018 4:33 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.

Relisted with NO changes HERE.

Ended with NO sale.

Relisted HERE for a lower price of $1,049.00.


Ended and NOT sold.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Sun May 13, 2018 4:34 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.

Relisted with NO changes HERE.

Ended with NO sale.

Relisted HERE for a lower price of $1,049.00.

Ended and NOT sold.


Relisted for a lower price of $999.00 HERE.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Thu Jun 14, 2018 3:36 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.

Relisted with NO changes HERE.

Ended with NO sale.

Relisted HERE for a lower price of $1,049.00.

Ended and NOT sold.

Relisted for a lower price of $999.00 HERE.


Ended with NO sale.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA

Re: EDELBROCK X-F8 XF8 Intake Manifold

Postby SixT5HiPo » Thu Jun 14, 2018 3:37 am

SixT5HiPo wrote:THIS reconditioned "Cross Ram" 8V aluminum manifold is for sale by eBay member " 007redline " for $1099.00.

" Up for sale is a beautifully restored Edelbrock X-F8 Cross Ram aluminum intake manifold. The intake is designed for any small block with a 260-289 or 302. Comes with the original linkage as well The intake will accept standard flange Holley carburetors or Edelbrock and Carters. It has been cleaned and then burnished to give it a almost polished look. Two of the inboard carburetor mounting holes are a little weak but these are only used if you have the small Carter carbs. Not many of these were sold in the day and these are extremely hard to find. You will not find a nicer one than this one!!!


This listing has ended.

Relisted with NO changes HERE.

Ended with NO sale.

Relisted HERE for a lower price of $1,049.00.

Ended and NOT sold.

Relisted for a lower price of $999.00 HERE.

Ended with NO sale.


Relisted for the same price HERE.
User avatar
SixT5HiPo
Enforcer!
 
Posts: 8488
Joined: Fri Nov 25, 2011 10:17 pm
Location: Philadelphia, PA


Return to Parts: Drivetrain or Body

Who is online

Users browsing this forum: No registered users and 2 guests